
                       Summary Information - Command Line

 -SFilename.Drv - Set soundcard driver

 -Sxx     Quick set sound card
             0 = No Sound
             1 = PC Speaker
             2 = Sound Blaster 1.xx
             3 = Sound Blaster 2.xx
             4 = Sound Blaster Pro
             5 = Sound Blaster 16
             6 = Sound Blaster AWE 32
             7 = Gravis UltraSound
             8 = Interwave IC
             9 = Pro Audio Spectrum
             10 = Pro Audio Spectrum 16
             11 = Windows Sound System
             12 = ESS ES1868 AudioDrive
             13 = EWS64 XL Codec
             19 = Generic MPU401 driver
             20 = Disk writer device

 -Axxx    Set sound card's address (hexadecimal)
 -D#      Set DMA channel (decimal)
 -I##     Set IRQ number (decimal)

 -M#####  Set mixing speed (decimal)
 -L###    Limit number of channels

 -C       Control playback in DOS Shell (with Grey +/-, Right Alt & Right Ctrl)
 -F       Disable file-colour distinctions
 -K       Exchange F1 and F11 keys
 -Px      Pattern memory allocation strategy.
            -P0 = Try to store patterns in conventional memory first, EMS is
                  only used once conventional memory runs out.
                   Not recommended, but those of you who use IT in Windows 3.xx
                   should try this option if you get EMS errors. (I recommend
                   that you don't use IT under Windows 3.xx at all)
            -P1 = Use one block of EMS for all patterndata.
                   This is the most memory efficient of all the pattern
                   storage modes - (this is also the default)
            -P2 = Use EMS blocks for each pattern
                   This is a VERY wasteful but 'safe' memory allocation scheme.
 -R       Reverse channels (flip left-right), same as Alt-R on the info page.
 -T1      Disable usage time indication
 -T2      Enable timeslice release
 -V1      Override VGA detection/Matrox detection.
 -V2      Force matrox compatibility mode (use with -v1)
 -X1      Disable internal MMTSR
 -X2      Disable mouse


                 Summary Information - Effects, alphabetically

 Volume Column Effects
  Ax - Volume slide up
  Bx - Volume slide down
  Cx - Fine volume slide up
  Dx - Fine volume slide down
  Ex - Pitch slide down
  Fx - Pitch slide up
  Gx - Portament to
  Hx - Vibrato with speed x

 General Effects
 Axx - Set speed (set number of frames per row)
 Bxx - Jump to order
 Cxx - Break to row xx of (next) pattern
 Dxy - Volume slide, x=0 down; y=0 up; x=F fine down; y=F fine up
 Exx - Pitch slide down by xx
 EFx - Fine pitch slide down by x
 EEx - Extra fine pitch slide down by x
 Fxx - Pitch slide up by xx
 FFx - Fine pitch slide down by x
 FEx - Extra fine pitch slide down by x
 Gxx - Portamento to note with speed xx
 Hxy - Vibrato with speed x, depth y
 Ixy - Tremor with ontime x, offtime y
 Jxy - Arpeggio with halftones x and y
 Kxy - Dual command: H00 and Dxy
 Lxy - Dual command: G00 and Dxy
 Mxx - Set channel volume to xx (0->40h)
 Nxy - Channel volume slide, x=0 down; y=0 up; x=F fine down; y=F fine up
 Oxx - Set sample offset to xx00h
 Pxy - Panning slide, x=0 right; y=0 left; x=F fine right; y=F fine left
 Qxy - Retrigger note every y frames with volume modifier x
        Values for x:
          0: (nothing)    4: -8           8: (nothing)    C: +8
          1: -1           5: -16          9: +1           D: +16
          2: -2           6: *2/3         A: +2           E: *3/2
          3: -4           7: *1/2         B: +4           F: *2
 Rxy - Tremelo with speed x, depth y
 S3x - Set vibrato waveform
 S4x - Set tremelo waveform
 S5x - Set panbrello waveform
        Waveforms for x in S3x, S4x and S5x:
          0 = Sine                      2 = Square
          1 = Ramp down                 3 = Random
 S6x - Pattern delay for x frames
 S7x - Instrument functions
        Values for x in S7x:
          0: Past note cut              5: Set NNA to note off
          1: Past note off              6: Set NNA to note fade
          2: Past note fade             7: Turn off volume envelope
          3: Set NNA to note cut        8: Turn on volume envelope
          4: Set NNA to continue
 S8x - Set pan position
 S91 - Set surround sound
 SB0 - Set loopback point
 SBx - Loop x times to loopback point
 SCx - Note cut after x frames
 SDx - Note delay for x frames
 SEx - Pattern delay for x rows
 SFx - Select parameterised MIDI Macro
 T0x - Tempo slide down by x
 T1x - Tempo slide up by x
 Txx - Set tempo (20h->0FFh)
 Uxy - Fine vibrato with speed x, depth y
 Vxx - Set global volume to xx (0->80h)
 Wxx - Global volume slide, x=0 down; y=0 up; x=F fine down; y=F fine up
 Xxx - Set panning position (0->0FFh)
 Yxy - Panbrello with speed x, depth y
 Zxx - MIDI Macro - check MIDI.TXT

                  Summary Information - Effects, categorically

Note: Not all effects are listed here.

Speed Control
 Axx - Set speed
 T0x - Tempo slide down by x
 T1x - Tempo slide up by x
 Txx - Set tempo (20h->0FFh)
 S6x - Pattern delay for x frames
 SEx - Pattern delay for x rows

Position Control
 Bxx - Jump to order
 Cxx - Break to row xx of (next) pattern
 SB0 - Set pattern loopback point
 SBx - Loop pattern x times

Volume Control
 Dxy - Volume slide, x=0 down; y=0 up; x=F fine down; y=F fine up
 Ixy - Tremor with ontime x, offtime y
 Mxx - Set channel volume to xx (0->40h)
 Nxy - Channel volume slide, x=0 down; y=0 up; x=F fine down; y=F fine up
 Vxx - Set global volume to xx (0->80h)
 Wxx - Global volume slide, x=0 down; y=0 up; x=F fine down; y=F fine up
 Rxy - Tremelo with speed x, depth y
 S4x - Set tremelo waveform

Panning Control
 Xxx - Set panning position (0->0FFh)
 S8x - Set pan position
 S91 - Set surround sound
 Pxy - Panning slide, x=0 right; y=0 left; x=F fine right; y=F fine left
 Yxy - Panbrello with speed x, depth y
 S5x - Set panbrello waveform

Pitch Control
 Exx - Pitch slide down by xx
 EFx - Fine pitch slide down by x
 EEx - Extra fine pitch slide down by x
 Fxx - Pitch slide up by xx
 FFx - Fine pitch slide down by x
 FEx - Extra fine pitch slide down by x
 Gxx - Portamento to note with speed xx
 Hxy - Vibrato with speed x, depth y
 Uxy - Fine vibrato with speed x, depth y
 S3x - Set vibrato waveform
 Jxy - Arpeggio with halftones x and y

                     Summary Information - Pattern Editor 1

Data Entry
 Alt-0 -> Alt-9  Set skipvalue to 0-9
 . (period)      Clear field(s)
 1               Note cut (^^^)
 `               Note off (ÍÍÍ) / panning toggle (in volume column)
 Spacebar        Use last (default) note/instrument/volume/effect/effectvalue

              ³ ³ ³³ ³ ³ ³ ³³ ³³ ³ ³ ³ ³³ ³ ³ ³ ³³ ³³ ³ ³ ³ ³³ ³ ³
              ³ ³ ³³ ³ ³ ³ ³³ ³³ ³ ³ ³ ³³ ³ ³ ³ ³³ ³³ ³ ³ ³ ³³ ³ ³
              ³ ³S³³D³ ³ ³G³³H³³J³ ³ ³2³³3³ ³ ³5³³6³³7³ ³ ³9³³0³ ³
              ³ ÀÂÙÀÂÙ ³ ÀÂÙÀÂÙÀÂÙ ³ ÀÂÙÀÂÙ ³ ÀÂÙÀÂÙÀÂÙ ³ ÀÂÙÀÂÙ ³
              ³ Z³ X³ C³ V³ B³ N³ M³ Q³ W³ E³ R³ T³ Y³ U³ I³ O³ P³
              ÀÄÄÁÄÄÁÄÄÁÄÄÁÄÄÁÄÄÁÄÄÁÄÄÁÄÄÁÄÄÁÄÄÁÄÄÁÄÄÁÄÄÁÄÄÁÄÄÁÄÄÙ

Pattern selection
 +, -               Next/Previous pattern (*)
 Shift +, -         Next/Previous 4 patterns (*)
 Ctrl +, -          Next/Previous order's pattern (*)

Miscellaneous
 Enter              Get default note/instrument/volume/effect
 '<' or Ctrl-Up     Decrease instrument
 '>' or Ctrl-Down   Increase instrument
 Grey '/'           Decrease octave
 Grey '*'           Increase octave
 ',' (comma)        Toggle edit mask for current field

 Ins/Del            Insert/Delete a row to/from current channel
 Alt-Ins/Del        Insert/Delete an entire row from pattern (*)
 Alt-N              Toggle Multichannel
 2*Alt-N            Multichannel selection menu
 Alt-Enter          Store pattern data
 Alt-Backspace      Revert pattern data (*)
 Ctrl-Backspace     Undo - any function with (*) can be undone.

 Ctrl-F2            Set (multiple) pattern length

Cursor Control
 Up/Down            Move up/down by the skipvalue
 Ctrl-Home/End      Move up/down by 1 row
 Alt-Up/Down        Slide pattern up/down by 1 row
 Alt-Left/Right     Move forwards/backwards one channel
 Ctrl-Left/Right    Move left/right between track columns
 Tab/Shift-Tab      Move forwards/backwards to note column
 PgUp/PgDn          Move up/down by n lines (n=Row hilight major)
 Ctrl-PgUp/PgDn     Move to top/bottom of pattern
 Home               Move to start of column/start of line/start of pattern
 End                Move to end of column/end of line/end of pattern
 Backspace          Move to previous position (accounts for Multichannel)

 Ctrl-C             Toggle centralise cursor option.

Track View Functions
 Alt-T              Cycle current track's view
 Alt-R              Remove all track views
 Alt-H              Toggle track-view divisions
 Ctrl-0             Deselect current track
 Ctrl-1 - Ctrl-5    View current track in scheme 1-5
 Ctrl-Left/Right    Move left/right between track columns

 Left-Ctrl &
  Left-Shift 1-4    Quick setup view scheme (and enable cursor-tracking)

 Ctrl-T             Toggle view-channel cursor tracking

                     Summary Information - Pattern Editor 2

Block functions.
 Shift-Movement Mark block
 Alt-B          Mark beginning of block
 Alt-E          Mark end of block
 Alt-D          Quick mark n/2n/4n/... lines (n=Row Hilight Major)
 Alt-L          Mark entire column/pattern

 Alt-U          Unmark block/release clipboard

 Alt-Q          Raise notes by a semitone (*)
 Alt-A          Lower notes by a semitone (*)

 Alt-S          Set instrument (*)
 Alt-V          Set volume/panning (*)
 Alt-W          Wipe volume/panning not associated with a note/instrument (*)
 Alt-K          Slide volume/panning column (*)
 2*Alt-K        Wipe all volume/panning controls (*)
 Alt-J          Volume amplifier (*) / Fast Volume attenuate (*)
 Alt-Z          Cut block (*)
 Alt-X          Slide effect value (*)
 2*Alt-X        Wipe all effect & effect value data (*)

 Alt-C          Copy block into clipboard
 Alt-P          Paste data from clipboard (*)
 Alt-O          Overwrite with data from clipboard (*)
 Alt-M          Mix data from clipboard with pattern data (*)

 Alt-F          Double block length (*)
 Alt-G          Halve block length (*)

 Alt-I          Select template mode / Fast volume amplify (*)
 Ctrl-J         Toggle fast volume amplification with Alt-J/Alt-I

Playback functions
 4              Play note under cursor
 8              Play row

 Ctrl-F6        Play pattern from current row
 Ctrl-F7        Set/Clear playback mark (for use with F7)

 Alt-F9         Toggle current channel on/off
 Alt-F10        Solo current channel on/off
