




____________                   __________________________
\           \                  \                      / /
|  _______   \                  \_______     ________/ /
|  |\_____\   \                  \______\   / \______\/
|  | |    |   |\                        |   | /
|  | |    |   || __________ ____  ____  |   | | __________ _____   ____
|  | |    |   || \ _____/ / \ / \ \ / \ |   | | \ _____/ /| \  /   \ / \
|  | |    |   || | |\___\/  | |/  | |/  |   | | | |\___\/  \ \ \  / / /
|  | |  _/    || | |_|____  | ||  | ||  |   | | | |_|___    \ \ \/ / /
|  | |_/   __/ | | ____/ /  | ||  | ||  |   | | | ___/ /     \/    \/
|  |/   __/  __/ | |\__\/   | ||  | ||  |   | | | |\_\/      /  /\  \
\      /  __/    | |_|_____ | \|__/ ||  |   | | | |_|_____  /  / |\  \
 \    / _/       /______/ / /_______/|  /___| | /______/ / /__/ /\ \__\
  \  / /         \______\/  \________/  \____\| \______\/  \__\/  \|__|
   \/ /
	\/                   **********************************************/
								------------------------------------->/
					*************************************************/
										  ------------------------->/
			  *****************************************************/
					  ------------------------------------------->/
		  *******************************************************/
								 ------------------------------>/
	 **********************************************************/
______________________________________________________________/







			 DEUTEX/DEUSF 3.4
			   March 1995

		   WAD composition tool for DOOM
		Copyright (c) Olivier Montanuy 1994/95
		      (montanuy@dmi.ens.fr)

		   Manual Edited by Kevin McGrail
		    (74107.1254@compuserve.com)























------------------------ Data Utility License -------------------------
DOOM(tm) is a trademark of Id Software, Inc.
The DOOM characters and the Id Software logo are trademarks of Id
Software, Inc. DOOM Copyright (c) 1993. Id Software Inc. All rights
reserved. This utility product is not a product of Id Software, Inc.
and has not been approved by Id Software, Inc. Id Software will not
provide technical support for this product. The purchaser of this
utility product may not distribute for money or other consideration
any software data created and/or modified by the use of this utility
product.
-----------------------------------------------------------------------


***************************** DISCLAIMER *****************************

	I will not accept liability for damages resulting from the use of
	this program. DeuTex and DeuSF are programmed in a very secure way,
	to limit the risk of bugs. They have as few tricky optimisations as
	possible. DeuTex and DeuSF use only basic level commands, and don't
	contain any Logical bomb or other tricks. They should work on all
	platforms, but this can never be 100% certain. The source code is
	available on request (for serious people only).

 Legalese:
			Read the license information at the end of this manual.
			DeuTex/DeuSF are freeware and Copyright (c) O.Montanuy 1994,1995.

 Distribution:
			DeuSF can be freely distributed.
			DeuTex cannot be distributed for *any* commercial purpose,
			with the sole exception of Compuserve download charges.


************************** CONVIVIALITY ******************************

DeuTex and DeuSF have no human interface.
If you can't do without, get WinTex, the Windows Shell for DeuTex
DeuTex is meant to be run from a batch creation file (e.g. make.bat).
DeuSF should be run from a batch installation file (e.g. install.bat).

***********************************************************************


+   *NEW* - Lines begining with a '+' indicate information added since
+   the manual for DeuTex v3.1 came out.
+   DeuTex 3.4 is mainly compatible with version 3.1 but not with
+   versions 2.9 and below. Changes are minor (format of text files, and
+   behaviour of some merge functions) but could be annoying.
+   Sorry for the nuisance, but as stuff became real to dirty, I had
+   to take some radical decisions.



 As of version 3.4, DeuTex/DeuSF can be considered as finished.
 Almost all the features a normal human would require are there
 I only need to add something to build/modify a WAD fast, in order
 to facilitate the building of preview PWADs. Normally, the join
 commands should make this useless, but you never know...

 The sources will be released as soon as they are clean enough for
 other people to read, understand and reuse. I hope this last step
 will simplify the creation of editors for future cool games.
																  page i




************************** Table of Contents ***************************


Data Utility License                                                     i
Disclaimer                                                               i
Conviviality                                                             i
Table of Contents                                                       ii
Features                                                                 v
What's  New?                                                            vi


				 ----------------------------
			 *** [PART ONE]   GETTING STARTED ***             1
				 ----------------------------



Chapter 1         OVERVIEW                                                1


		   A) What is DeuTex?                                     2
		   B) Installation                                        2
		   C) Directories and DeuTex                              4
		   D) What do I need?                                     4
		   E) What do I do?                                       4
		   F) What is DeuSF for?                                  5
		   G) What are the Palettes For?                          5


Chapter 2         TEST-ME or What's inside TRINITY.WAD?                   7


		   A) About Test-Me                                       7
		   B) Listing the Directory                               7
		   C) Decomposing TRINITY.WAD                             7
		   D) Recomposing TRINITY.WAD as TRINIDAD.WAD             8
		   E) Customizing TRINITY.WAD                             8


Chapter 3         WORKING WITH WADS                                       9


					INTRODUCTION                                  9

		   A) How to Decompose a PWAD                             9
		   B) How to Create a PWAD with new TEXTURES             10
		   C) How to Create a PWAD with new SPRITES and FLATS    11

			 1) Sprite and Flat Replacement                  11
			 2) Changing the Number of Sprite Viewpoints     12

		   D) How to Create a PWAD with new SOUNDS               14


Chapter 4         WinTex                                                 15




								page ii




********************** Table of Contents (cont) ************************



				 -----------------------------
			 *** [PART TWO]   DETAILS, DETAILS ***         16
				 -----------------------------



Chapter 5         DIRECTORY STRUCTURE                                  16


		   A) \Levels                                          17
		   B) \Lumps                                           18
		   C) \Textures                                        19
		   D) \Sounds                                          20
		   E  \Graphics                                        20
		   F) \Sprites                                         21
		   G) \Flats                                           21
		   H) \Patches                                         22



Chapter 6         DEUTEX COMMANDS                                      23


		   A) Complete Command Reference                       23
		   B) Help Commands                                    23
		   C) Optional Commands                                23
		   D) Commands to Compose or Decompose WADS            25
		   E) Commands for merging PWADS into the Main IWAD    26



Chapter 7         DEUSF COMMANDS                                       28


		   A) Overview                                         28
		   B) Complete Command Reference                       29
		   C) Help Commands                                    29
		   D) Optional Commands                                30
		   E) Mandatory Commands                               30



Chapter 8         FORMATS                                              31


		   A) The WAD Creation Directive (WADINFO.TXT)         31

				 1) Overview                                   31
				 2) WADINFO.TXT format                         32
				 3) An example WADINFO.TXT Listing             36

		   B) The Texture Definition File (TEXTURE1.TXT)       39

				 1) Overview                                   39
				 2) An Example TEXTURE1.TXT Listing            41


								  page iii




********************** Table of Contents (cont) ************************




				 ---------------------------
			 *** [PART THREE]   ALL THE REST ***                  43
				 ---------------------------




Chapter 9         NECESSARY STUFF                                      43



	   A) License Agreement                                        43
	   B) Legal Stuff                                              44
	   C) Where to get DeuTex/DeuSF                                45
	   D) Version Information                                      46
	   E) Known Problems                                           47
	   F) Thanx                                                    48
	   G) Final Words                                              50



APPENDICES


	   I) Switch Textures in DOOM.WAD                              51
	  II) Animated Wall Textures in DOOM.WAD                       56
	 III) Sound Names for DOOM                                     58

		 A) Sounds found in BOTH DOOM I and DOOM II            58
		 B) Sounds found ONLY in DOOM II                       60
		 C) Converting DMAUD Sounds for DeuTex                 62

	  IV) DeuTex and DeuSF Command Summaries                       64

		 A) DeuTex Commands                                    64
		 B) DeuSF Commands                                     65




















								 page iv




****************************** FEATURES *******************************

			     ------------
				DeuTex
			     ------------

DeuTex stands stands for DEU's Texture Companion, because it used to
deal only with DOOM textures. Now it can do much more!
DEU is a DOOM level editor by Brendon Wyber and Raphael Quinet, and
DeuTex was originally derived from the code of DEU 5.21. DeuTex uses
various contributions for particular file formats.

DEUTEX Features:

-  Ported on all DOOM environement (DOS,OS/2,Linux,SGIx,Unix)
-  Reverse engineer existing PWADs.
-  Compose your own wall Textures, by reusing existing DOOM
   Patches or adding your own Patches as .BMP or .GIF files.
-  Load Sounds as .WAV, .AU or .VOC files.
-  Load PC Speaker Sounds as a serial of number (in text).
-  Load music entries as .MUS files. (from MIDItoMUS)
-  Add your own floors.
-  Add your own Sprites.
-  Simple WAD creation directives from a text file.
-  Simple directory structure for the resources.
-  Work in batch mode, like a compiler.
-  A Windows shell can be used to make your life easier.
-  Compatible with Level editors (like DEU,WinDEU).
-  Merge a PWAD into the main IWAD, recreating the WAD directory,
   so that ANY or ALL kinds of Sprites and/or Flats can be defined,
   while distributing only the changed ones in the PWAD.
-  Extract Graphics, Bitmaps and Lumps out of your favorite PWAD,
   for contemplation or reuse. (WITH WAD AUTHOR AGREEMENT ONLY!)
-  Check your PWAD for errors in Texture definitions.
-  Create animated walls with (almost) any sequence of pictures.
-  Create a non repeating sky Texture.

			     -------------
				 DEUSF
			     -------------

DeuSF stands for DEU Sprite and Flats. It is mainly used to
compensate a bug in DOOM Sprite and Flats handling.

DeuSF was inspired by DMADDS by Bernd Kreimeier, but is more powerful
and much cleaner. Like DMADDS, DeuSF compensates for a bug in DOOM
concerning the treatment of external Sprite and Flat PWADS. It will
enables you to distribute PWADS containing only the Sprites and/or Flats
that you wish to replace. There are some caveats here, so read the
manual! DeuSF can read DMADDS files, but its' preferred PWAD composer is
of course DeuTex, since PWADS composed for DMADDS are very dirty inside.

DEUSF Features:

-  Recreate a complete Sprite and/or Flat PWAD from a partial Sprite
   and/or Flat PWAD and the main WAD of DOOM.

WARNING: The Sprite names VILE[, VILE\ and VILE] are not valid DOS file
	names, so DeuTex replaces them with VILE$, VILE@ and VILE# when
	extracting them to files. Use these names for your files, too.

								  page v





***************************** WHAT'S NEW? *****************************

+ New in DeuTex 3.4
+
+ -  Many many corrections of small bugs (and compiler errors, dammit!)
+ -  function -usedtex to find the texture use in all levels
+ -  Overwrite switch (-o) to replace data (when you really want it).
+ -  A fully working merge and join function (I hope)
+ -  Improved support for WinTex


+ New in DeuTex 3.3
+
+ -  Added a -get function to retrieve a single WAD entry
+    (sound of picture)
+ -  Improvements to -merge so that it can be used with Heretic
+      NOTE: HERETIC V1.0 CAN'T USE EXTERNAL SPRITE WAD.
+      THIS IS A BUG INHERETIC, NOT DEUTEX, DEUSF OR NWT
+ -  Sound formats corrected (at least) but compression not supported.
+ -  Now -merge and -app, -join preserve the file time, not only the
+    contents so that you can still patch your IWAD after -merge.
+ -  A _DEUTEX_ entry is added in the WAD directory, for -merge
+    and -app and -join so that even if you use some pervert tool
+    on your WAD, -restore should be able to restore it provided
+    your tools don't modify bytes before the directory.
+    This is for ease of use with NWT.
+      NOTE: DON'T USE DMGRAPH ANYMORE. IF YOU WANT TO MERGE ENTRIES
+      INTO A WAD, MAKE A SPECIAL WAD OF THESE ENTRIES AND USE
+      DEUSF -join TO MERGE THAT NEW WAD INTO THE DESIRED WAD
+ - New [MUSICS] section and MUSICS subdirectory. Yes, I suddenly had
+   enough of mixing sounds and music. Should have done that before
+ - Small patch to prevent DCK from bugging at modified IWADs
+ - DeuTex can now read duplicate sections in Wadinfo.txt
+   when extracting new data, if wadinfo.txt exist , it appended

	  SUPPORTED


   DOOM  registered                  1.1 to 1.8 and above
   DOOM2                             1.6 to 1.8 and above
+  HERETIC registered                1.0 and (probably) above

	 NOT SUPPORTED  (by request of IDsoftware)

   DOOM shareware
+  HERETIC shareware

   It is possible for a hacker to modify DeuTex/DeuSF and make
   it compatible with DOOM or HERETIC shareware.
   If you're *that* short of money that you're ready to hack a
   prog to save 40$ and the pleasure to be supporting one of the
   very best game company, please don't distribute your version
   of DeuTex/DeuSF, because I'm have no time to spend answering
   to questions about a hacked DeuTex that could possibly fail
   very differently than the original.





								   page vi




					----------------------------
				*** [PART ONE]   GETTING STARTED ***
					----------------------------


CHAPTER 1
****************************** OVERVIEW *******************************

DeuTex is a GREAT program!

<editors note>
(preceding claim inserted over the objections of Olivier Montanuy) ;-)


*********************** A Note About This Manual ***********************

There is a lot of redundancy in the manual. This is intentional. The
manual is intended to be used as a reference. When you have a question
on a particular aspect of DeuTex, look up a likely entry in the Table of
Contents, and read that entry. It should have the information you need.
This is to prevent you from having to jump around from page to page to
figure out a procedure in DeuTex. This doesn't mean that sections are
identical. Each section attacks a problem from a different viewpoint.
If one section doesn't help you, maybe a different 'angle' will.

************************************************************************

This manual has a lot of trees in it. This chapter will give you a view
of the forest. DeuTex and DeuSF are powerful programs that will let you
do almost anything you can imagine in composing or manipulating PWADS.
Notice the word composing. Deutex is an Orchestra Conductor. It can
perform whatever music you write for it brilliantly, but you must
supply the musicians. A PWAD consists of many parts. DeuTex coordinates
those parts to give you the PWAD you desire, but it doesn't create
them. With DeuTex you have access to all the resources in the DOOM1 or
DOOM2 IWADS. Since it does so many things, it might seem a little
confusing at first glance. Don't worry. If you are familiar with DOOM
(read Matt Fell's DOOM specs and Hank Leukart's DOOMFAQ), then all you
need to learn about DeuTex is it's organization.

There are so many resources in DOOM that it isn't reasonable to put them
all in one directory. DeuTex uses a subdirectory for each entry type.
Using these subdirectories is easy once they're explained.

Deutex makes it possible to use a simple, straightforward method for
working with custom graphics (and sounds).  The approach is as follows:

 1) Put your resource files in subdirectories such as FLATS, SPRITES,
	etc., further discussed below.

 2) Use a `Wadinfo' file called something like `goodies.txt' to tell
	Deutex how to assemble the resources into a PWAD.

 3) Run `deutex -make goodies.txt goodies.wad' to make the PWAD.

Now you can play your level with the resources, without any fuss
(unless, of course, something has gone wrong along the way).



								   page 1




This method works for any resource. You can make sound-only wads that
will play with any version of DOOM. You can include Level maps in a
multi-level PWAD. DeuTex will put the Levels where you want them,
regardless of the internal ExMy OR MAPxx of the Level. If the finished
PWAD doesn't contain new Sprites or Flats, it can be played as is.
Otherwise, it can be rendered playable with DeuSF, which can be freely
distributed with your PWADS.

The DeuTex Visual Basic shell let's you use the Windows environment to
distribute those entries in the right directory, and then execute the
-make command. It doesn't change the way DeuTex works, it only makes
your life easier.

                           ---------------
A)                         WHAT IS DEUTEX?
                           ---------------

DeuTex is a PWAD compiler. It allows you to organize ALL the resources
you modify, and group them into your PWAD in a single step. This
eliminates the need for running a different program for each type of
editing you want to do (DMAUD, DMGRAPH, DMADDS, etc).

DeuTex is NOT a:
                map editor,          (use DEU, DoomCAD, WadEdit...)
                nodes builder,       (use DEU, BSP, IDBSP,...)
                reject map builder   (use RMB or REJECT)
                DOOM.EXE editor      (use DEHACKED)

Your Level map with nodes, reject and blockmap already calculated is
just another resource to DeuTex. If you don't want to redefine or create
Textures, Flats, Sounds, etc. in your PWAD, you don't need DeuTex.

       On the other hand, if you redefine LOTS of stuff,
       you'll wonder how you ever got along without it.

If you've worked with wads before, you know how many times you have to
go in and change something! With DeuTex, you just edit the resource you
want to change, throw it back in it's subdirectory, and run a batch
file to put everything together again.

                            ------------
B)                          INSTALLATION
                            ------------

DeuTex comes in zipped format. Naturally, you need a copy of PKUNZIP
(v2.04G) to unzip it. If you don't have one, go get it! It's probably
available the same place you got DeuTex. PKUNZIP also exist for Unix. 

The file name is DEUTEX34.ZIP or something like it. This manual is valid
for DeuTex versions 3.4 and above. Some information is not applicable to
previous versions, and may cause you problems. Be forewarned!

Installing DeuTex:

DeuTex and DeuSF should be put somewhere in your path, e.g. under
C:\DOS in DOS, ~/bin under Linux/Unix, etc. This is not ABSOLUTELY
necessary, as you can put a copy in your working directory each time
or specify path names in all the commands, but, believe me, it makes
life much simpler.


								  page 2




You should enable DeuTex/DeuSF to locate your DOOM or DOOM2 files
by creating an environmental variable DOOMWADDIR that points to
your DOOM path like this: 

For DOS, put the line 'SET DOOMWADDIR=C:\GAMES\DOOM' in AUTOEXEC.BAT.

For Linux/Unix, use 'setenv DOOMWADDIR ~/games/doom' in .tcshrc.

This is more important for the Linux/Unix version, since with DOS
the command DeuTex -doom <doomdir> will achieve the same result. In
DOS, it's possible to get an 'out of environment space' error if you
have too many variables defined in autoexec.bat (including path, etc).
If this occurs, use DOS Help for the SHELL command to find out how to
increase your environment space.

       Of course, DeuTex will only work if the REGISTERED
       version DOOM.WAD or DOOM2.WAD is available.

Should you be in dire need of disk space, or should you wish to use
DeuTex on a machine that can't run DOOM, you can use DeuTex to build a
fake DOOM.WAD or DOOM2.WAD, keeping only the structure of the directory
and the entries PLAYPAL, TEXTURE1, TEXTURE2 and PNAMES. Of course, to do
this, you first need a complete registered DOOM.WAD or DOOM2.WAD, and
even then it's a real pain. Beware to keep that file for yourself ONLY.

The zip file for DeuTex 3.0 contains the following files. For
illustration purposes, the diagram assumes you put DTEX30.ZIP
in the root directory (C:\). Directory information is embedded
in the zip file, so use the PKUNZIP -d option:

     PKUNZIP -d DTEX30.ZIP  will produce:

C:\dtex30.zip
  |_
    \DEUTEX\  deusf.exe    - DeuSF program.
	   |  deutex.exe   - DeuTex program.
	   |
	   |  dtexman.txt  - This manual.
	   |  file_id.diz  - For BBS use.
	   |  midi2mus.exe - MIDI to .MUS converter.
	   |  readme.txt   - Short descrition of DeuTex/DeuSF.
	   |_
	   | \PALETTE\ doompal.pal - DOOM, PaintShop Pro format.
	   |           doompal.ppm - DOOM, PPMQUANT format.
	   |           palette.txt - Short description of the palettes.
	   |           heretic.pal - HERETIC, PaintShop Pro format.
	   |_
	     \TEST-ME\ test-me.txt - Directions for the TRINITY example.
		       trinity.bat - DOS batch file for TRINITY example.
		       trinity.cmd - OS/2 file for TRINITY example.

You may end up moving the palettes if you want them in their native
application's directory, but leave DEUTEX\TEST-ME alone. When you do
the demo, you'll want it to be in its own directory.


WinTex, the Visual Basic shell for DeuTex, has gone so huge and
powerfull that it's now a tool of it's own. It is available
separately, as WINTEX34.ZIP.


								 page 3

		       ----------------------
C)                     DIRECTORIES AND DeuTex
		       ----------------------

Chapter 5 tells you all about the directories DeuTex uses, but this
section will give you the general picture. I'm going to use an
imaginary cakemaking machine to explain DeuTex's directories (I know,
I know, it's stupid! <g>). To make cake with this machine, you put your
flour in one, container, raisins in another, sugar another, milk,
icing, walnuts, chocolate, eggs, etc. All your best stuff, each in it's
own place. Then you flip the switch, and the machine thumps and smokes,
and voila! Cake!

DeuTex works in the same way . You put your Map in one box, Sounds in
another, Textures, Patches, Graphics, Lumps, Sprites and Flats all in
their own boxes. If you don't want raisins today, leave the Sprites box
empty. When all is in place, flip the switch (DeuTex -make, in a batch
file preferably), DeuTex thumps and smokes for a little while, and
voila! PWAD!

                            ---------------
D)                          WHAT DO I NEED?
                            ---------------

************************** User Requirements *************************

ATTENTION: DeuTex is not completely trivial to use. It requires a
           fully functional processing unit, with a least 10000 meg
           of available neurons, some basic DOS and DOOM specs dynamic
           libraries and at least 1 or 2 hours of spare processing
           time at a minimum 80% attention rate. You have been warned.

SUGGESTION: If you use DeuTex, try New Wad Tool, too. The two tools
            combine very well together under DOS. (NWT is not available
            for other O/S).

************************ Hardware Requirements ***********************

This program is an ordinary DOS executable, compiled in a HUGE memory
model, with 386 instructions. It does not make use of a math copro-
cessor. It should run with about 500k of free base memory, or less. It
might not run under a 286. It was tested on a Compaq LITE 4/33c and an
IBM Thinkpad 755c.

Unix, Linux, OS/2, SGiX and Alpha versions are also available. 

                           -------------
E)                         WHAT DO I DO?
                           -------------

Please read this Manual before asking questions. I know it's boring, but
this IS freeware, and I have limited time to support it. Bug reports ARE
appreciated IF they come with the files you were using when the bug
occurred, and a full description of it.

Read and be familiar with all the DOOM literature you can, especially
the 'unofficial' DOOM SPECS 1.6 by Matt Fell. You don't need to read the
file formats, but you need to understand what the different entries are
for, and the tricks and limitations of DOOM.


                                                                  page 4




DeuTex makes some checks on your PWAD, but I don't have time to program
for all possible errors.  Become familiar with the various editors you
need to create the resources used in this program. DeuTex does not edit
things. It puts the things YOU edit together. For editing, use the best
Sound or Graphic editor you can afford.

When the foregoing is done, you take all your cool stuff. You put it in
DeuTex's boxes. You give DeuTex the directions on what to DO with your
stuff. You run DeuTex. That's All, Folks.




                         ------------------
F)                       WHAT IS DEUSF FOR?
                         ------------------


DeuSF is a program to help overcome some of DOOM's limitations,
and still be able to distribute a reasonable sized PWAD. With
Sprites and Flats, you have to replace EVERYTHING in order for
DOOM to work right. This makes for a big PWAD (3 to 5 megs), and
it's illegal to take iD's Sprites or Flats from DOOM, put them in
your PWAD, and then distribute them.

DeuSF allows you to replace as few Sprites and Flats as you desire,
and distribute ONLY THOSE with your PWAD. With the appropriate batch
file, it will change things at the USER's site to enable your PWAD to
play, without stepping on toes, or asking people to download multi-
megabyte single Level PWADS!

Another advantage of DeuSF is that it makes Sprite PWADs playable with
either DOOM or DOOM2 using the same install.bat file. Isn't that great?



 
                     --------------------------
G)                   WHAT ARE THE PALETTES FOR?
                     -------------------------- 


doompal.pal  (JASC palette, for Paintshop PRO shareware program)
doompal.ppm  (Portable Pix Map, for PBMPLUS freeware package)

These are the color palettes used by DOOM.

If you edit or create any graphics (Patches, Sprites, etc.) in your
favorite graphics program, the colors will most likely be different
from the ones used in DOOM. When they are inserted in a PWAD, they
need to be 'quantized', which is a fancy word for color-matched.
Although this sounds simple, it can actually be quite involved. DeuTex
can quantize colors, but it's not optimised for that, so quantization
might be slow and quite poor.







                                                                  page 5




What should you do before inserting a picture with DeuTex?

* AVOID regular patterns, like squares/stripes. These patterns are prone
  to create ugly aliasing when scaled by DOOM.
* SMOOTH it! I mean, apply a low pass filter so that it appears blurred.
  This will also hide some of the aliasing effects of scaling.
* QUANTIZE your colors with one of the supplied DOOM palettes. DeuTex is
  optimised for the original DOOM palette. If you use another palette,
  it will be slower. DeuTex will quantize your colors to the DOOM colors
  using a strange alchemy. No dithering.
* TRANSPARENT areas should be made of A UNIQUE COLOR, preferably CYAN
  (r=0,g=255,b=255, but you can specify another color to DeuTex.)

  WARNING: Some lame programs don't support full 0-255 range. CYAN could
           be r=0, g=252, b=252. Experiment first.  

The enclosed palettes are in the format of two good graphics programs.
Use them to quantize your pictures before you feed them to DeuTex.
	
doompal.pal is in the format used by PAINTSHOP PRO v2, a popular
shareware graphics program with excellent color conversion capabilities.

To convert with doompal.pal in PAINT SHOP PRO:

 -  Load the file you want to convert.
 -  Select *Colors* from the menu bar.
 -  Select *Load Palette* from the drop-down menu.
 -  Browse to find doompal.pal and select it.
 -  In the 'apply palette to image using' box, select *error diffusion*.
 -  Select *OK*.

PaintShop Pro will then quantize your image to the DOOM palette.

 -  Select *File* from the menu bar.
 -  Select *Save As* from the drop-down menu.
 -  Select *BMP - OS/2 or Windows Bitmap* from 'List files of type'.
 -  Select *Windows RGB Encoded* from 'File Sub-format'.
 -  Select *OK*.

DOOM will now display your Graphic pretty much as you expect.

If you want to make a .PBM (portable bitmap), use ppmquant on your
picture, with doompal.ppm as the reference for colors.

+ Alternatively, if you extract a DOOM Graphic with DeuTex, it will
+ contain the DOOM palette. You can then feed it to your favorite
+ program, and let it extract the palette for later reuse.
+
+ WARNING: 
+ Experiment with this first, as your program might not do what you
+ expect it to. For example ZSoft's PC Paintbrush will load the DOOM
+ Graphic correctly and allow you to save the palette. However, if you
+ take a 24 bit image and load the palette, nothing will happen. You can
+ let PC Paintbrush convert the image to 256 colors (which it will do
+ poorly), and then apply the palette. The results will be grotesque,
+ because it doesn't quantize when applying a palette. A DOOM palette
+ saved in this program would be useful only for Graphics you want to
+ hand-draw from scratch. The moral is, if you don't know what you're
+ doing, experiment first before using a Graphic you don't want to lose.


								 page 6




CHAPTER 2
*************** TEST-ME or What's inside TRINITY.WAD? *****************

                             -------------
A)                           About TEST-ME
                             -------------

    TRINITY.BAT let's you have a quick overview of some of the cap- 
    abilities of DeuTex so you can decide if it's worth the trouble.

TRINITY.BAT does the following:

    It lists the contents of TRINITY.WAD (with identifications).
    It decomposes TRINITY.WAD and builds TRINIDAD.WAD.
    All this in only 3 trivial DeuTex commands.

Requirements:

-  You must have TRINITY.WAD, the great PWAD by Steve McCrea.
   (available on infant2.sphs.edu as TRINITY2.ZIP and
   in the Compuserve GAMERS FORUM LIB 8 as TRINTY.ZIP)
-  Doom must be in the \DOOM directory (\DOOM2 could work too)
-  TRINITY.WAD must be in the current directory.
-  You must have *some* room left on your disk :-)
-  You must be running DOS 5.0 or higher.
-  You must NOT reuse any part TRINITY.WAD without crediting Steve.

Description of the file, TRINITY.BAT:

                        ----------------------
B)                      Listing the directory
                        ----------------------

      rem     ***DeuTex***
      deutex  -doom \doom     -wadir TRINITY.WAD
              ^^^^^^^^^^^^    ^^^^^^^^^^^^^^^^^^
                  (a)                (b)

(a)---> This tells DeuTex that DOOM.WAD and DOOM.EXE are in the
        \DOOM directory. OPTIONAL.
(b)---> This tells DeuTex to list the directory of TRINITY.WAD
        reporting the entry types. Types *could* be wrong, but not
        with Trinity.

                        ------------------------
C)                      Decomposing TRINITY.WAD:
                        ------------------------

      rem     ***DeuTex***
      deutex  -doom \DOOM    -dir .    -xtract TRINITY.WAD
              ^^^^^^^^^^^    ^^^^^^    ^^^^^^^^^^^^^^^^^^^^^^
                  (a)         (b)               (c)

(a)---> The same as before.
(b)---> This tells DeuTex that it must store the result in '.' (which is
        the current directory).  You could skip (b), since '.' is the
        default, or you could specify another directory, like -dir TEST.
(c)---> This tells DeuTex to extract all entries from TRINITY.WAD.



								  page 7




                ----------------------------------------
D)              Recomposing TRINITY.WAD as TRINIDAD.WAD:
                ----------------------------------------

      rem    ***DeuTex****
      deutex  -doom \doom   -dir .   -make WADINFO.TXT TRINIDAD.WAD
              ^^^^^^^^^^^   ^^^^^^   ^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^
                  (a)        (b)            (c)            (d)

(a)--->  The same as before.
(b)--->  The same as before.
(c)--->  This tells DeuTex to create a new PWAD, from the
         creation directives contained in WADINFO.TXT.
(d)--->  This is the name of the created PWAD.


                        ------------------------
 E)                     Customizing TRINITY.WAD:
                        ------------------------

    You can edit WADINFO.TXT, the format is pretty simple to guess.
   (see Chapter 8 - FORMATS for a precise definition.)

-  A line that begins with a ';' or '#' is a comment. DeuTex ignores it.
-  Don't touch any lines with [xxxx] (they are section delimiters).

+ Lets look at the [MUSICS] section:

+   [MUSICS]
    D_E1M1

+   This tells DeuTex to go into the \MUSICS subdirectory and get a file
    called D_E1M1.MUS, which is the music of TRINITY.WAD. You might
    wish to delete this D_E1M1 if your soundcard crashes while playing
    trinity.

    You can add your own music, for Episode 1 Mission 2 by editing:

+	[MUSICS]
	D_E1M1
	D_E1M2

    Of course, the file D_E1M2.MUS must exist... You can generate it
    from D_E1M2.MID (MIDI format) by using MIDI2MUS.



BEWARE: DeuTex is NOT fool proof yet. It should not crash your
        computer, but the generated PWAD may crash DOOM if you make
        mistakes. I'm very sorry for this, but I have more urgent
        optimizations to do than foolproofing. However, the PWAD
        generated here should not crash DOOM, if you use the real
        TRINITY.WAD as a basis.








                                                                  page 8




CHAPTER 3
************************** WORKING WITH WADS **************************

                              ------------
A)                            INTRODUCTION
                              ------------

Read the DOOM SPECS:
Sorry. This is still unavoidable, because of the various tricks and
limits of DOOM. If you have a problem, there is a VERY GOOD chance
it's referred to somewhere in Matt Fell's SPECS.

NOTE: In the following discussion, avoid these common mistakes:

Hall of Mirrors with new Textures:

         First, create your Level.
         Then, build the nodes and reject.
         Then add the new Textures.

Why? We don't know.  leonardc@halcyon.com reported he saw a hall of
mirrors with old versions of DeuTex that didn't first load the old DOOM
Textures. It seems to be a problem with the node builders.

Tutti Frutti and Medusa Effect:

See the DOOM specs, and Chapter 8 - FORMATS.
If DOOM attempts to display part of a Texture not covered by a Patch,
you'll see some ugly garbage (usually has pinks and greens, thus 'Tutti
Frutti'). The same thing happens if you use more than one Patch on a
Texture with transparent areas, or walls with see-thru portions on upper
or lower Textures. If the area is big enough, it will slow the display
to a crawl ('Medusa Effect' - Looks like snakes and turns you to stone).

Doom reports a void column and exits:

One of your Textures has a column with no Patches. Use DeuTex -check on
a PWAD before running DOOM. It reports Textures that have void columns.
	
 Other bugs:

   Mail me a description of the bug, together with any configuration
   files. Don't expect a quick answer, though.

                        -----------------------
B)                      How to decompose a PWAD
                        -----------------------

First check that all the entries are identified correctly:

  DEUTEX -wadir NEWBIE.WAD    This will list the directory.

Then try:

  DEUTEX -unused NEWBIE.WAD   This will tell you if there is any wasted
                              data in the PWAD. It's always funny to see
                              how DMGRAPH and DMAUD waste *some* data.
                              This won't tell you about any data wasted
                              by incorrect entry formats, though.


                                                                  page 9




To extract all the entries:

   DEUTEX -xtract NEWBIE.WAD  The whole directory structure is extracted
                              to subdirectories. WADINFO.TXT is created
                              in the working directory. TEXTURE1.TXT is
                              created in the \TEXTURES subdirectory.


To extract only a part of the directory; Sounds, for instance:

DEUTEX -sound -xtract NEWBIE.WAD   Only the Sounds are extracted and
                                   placed in the \SOUNDS subdirectory,
                                   which is created if it doesn't exist.

NOTE: Some PWAD creators declare Patches, Flats and Sprites outside of
      the normal boundaries. In that case, DeuTex may not identify them
      correctly. They'll end up in either the \LUMPS subdirectory in raw
      (.LMP) format, or the \GRAPHICS subdirectory (.BMP). Care has been
      taken to handle the most common situations, and this almost never
      happens in fact, but there is no general solution. You may have to
      check that all entries have been properly identified.

Once you have decomposed a PWAD, you can rebuild it with:

DEUTEX -make WADINFO.TXT NEWBIE.WAD

WADINFO.TXT already exists, because it was automatically created during
the extraction of NEWBIE.WAD (cool, no?). Make sure you delete or move
the previous version of NEWBIE.WAD before you remake it, because DeuTex
will not overwrite your files (you might not like it :-]).

NOTE: DEUTEX puts a signature in the first few bytes of a created PWAD,
      to identify which version of DEUTEX was used.

                 --------------------------------------
C)               How to create a PWAD with new Textures
                 --------------------------------------

 First list DOOM's Textures, as a reference:

 DEUTEX -dmtexture

 This will extract all the Textures from the main IWAD. They will be
 written to OLDTEX1.TXT (and OLDTEX2.TXT for DOOM1 only). These text
 files will be placed in the subdirectory \TEXTURES, which will be
 created if it doesn't exist. These files make it easy for you to
 redefine existing Textures by cutting them out and pasting them into
 YOUR Texture definition file. For DeuTex 3.1 and above, they serve no
 other purpose. You can delete what's left of them when you're
 finished.

 To create a new Texture, define it in a Texture file you create (e.g.
 TEXTURE1.TXT). TEXTUR1.TXT can have any name but TEXTURE1.TXT is
 prefered. You can use as many Texture files as you like, as long
 as they're declared in WADINFO.TXT. Place your file(s) in the
 \TEXTURES subdirectory. To redefine an existing Texture, just cut the
 desired Texture out of OLDTEX1.TXT or OLDTEX2.TXT (DOOM1 only).
 Paste them into TEXTURE1.TXT. Then edit them as you please. You can
 delete OLDTEX1.TXT and OLDTEX2.TXT when you're finished.


                                                                 page 10




 NOTE: For DOOM1/HERETIC only, use one file for redefined Textures
       from OLDTEX1.TXT, and another file for redefined Textures 
       from OLDTEX2.TXT. In DeuTex v3.3, WADINFO.TXT uses a second
       Texture section called [TEXTURE2] for redefined OLDTEX2 files. 


 DeuTex 3.3 doesn't care if OLDTEX1.TXT or OLDTEX2.TXT exist.
 DeuTex 2.x used to require that all the old textures be present,
 but now DeuTex 3.3 first read the internal DOOM texture definitions,
 then reads the file you tell it to read, for new definitions.
 If you mistakenly define the same Texture in multiple files,
 only the last declared version will be used. Of course, that means
 that if you redefine a DOOM texture your version will be used.

Declare TEXTURE1 in the [TEXTURE1] section of WADINFO.TXT.
Then build your PWAD:

DEUTEX -make WADINFO.TXT NEWBIE.WAD

At this point, it would be a good idea to
check your new PWAD for Texture errors:

DEUTEX -check NEWBIE.WAD


            -----------------------------------------------
D)          How to create a PWAD with new Sprites and Flats
            -----------------------------------------------

******** 1) Sprite and Flat REPLACEMENT

BEWARE: Sprite replacement is tricky. If some needed sprites are
  missing DOOM will lock up. Check your work often.

Put your Sprite files in \SPRITES in .GIF or .BMP format.
Put your Flat files in \FLATS in .GIF or .BMP format.
Declare your Sprite NAMES in the [SPRITES] section of WADINFO.TXT.
Declare your Flat NAMES in the [FLATS] section of WADINFO.TXT.
Use only the NAME in WADINFO.TXT, without the .GIF or .BMP extension.

 Since DeuTex 3.1:
 The '=' label lets your Sprites keep the names YOU have given
 them. It tells WADINFO.TXT what DOOM Sprite you mean to replace.
 This enables you to name your sprite files as you damn wish.


If you want to replace *ALL* of the Sprites and Flats in DOOM (crazy):

DEUTEX -iwad -make WADINFO.TXT NEWBIE.WAD

NEWBIE.WAD will be directly usable by DOOM.


Remember: replacing only part of the Sprites and Flats mean you'll
need DeuSF to install your PWAD, but it will be compatible with ALL
versions of DOOM and DOOM2. Redefining all the Sprites is not a good
idea unless you really mean it.




                                                                 page 11




To replace *SOME* of the Sprites and/or Flats in DOOM (better):

DEUTEX -make WADINFO.TXT NEWBIE.WAD

This NEWBIE.WAD will be much smaller and easier to distribute.
BUT: This NEWBIE.WAD will cause DOOM to lock up when it starts!(bad)

    So, if you want to replace only *SOME* of the Sprites and Flats in
    DOOM, you have 3 choices:

DEUTEX -merge NEWBIE.WAD           Modifies DOOM.WAD or DOOM2.WAD.
                                  (Safe, fast, and small)

DEUSF  -append NEWBIE.WAD          Modifies NEWBIE.WAD.
                                  (Safer, still fast, wastes some space)

DEUSF -add NEWBIE.WAD NEWBIE2.WAD  Creates NEWBIE2.WAD.
                                  (Safest, not slow, more space wasted)
+
+ NEW! To merge two PWADS that both redefine Sprites and/or Flats:
+
+ DEUSF -join FIRST.WAD SECOND.WAD  (FIRST.WAD now contains both wads)


NOTE: The steps above are performed at the end users' site, preferably
      from a batch file supplied with your PWAD. This means the user
      must have DeuSF, which can be distributed freely with your PWAD,
      or DeuTex, which has some restrictions on distribution. See the
      License Agreement at the end of this manual for the restrictions
      on distributing DeuTex.

The -sprite command is used to add only Sprites, ignoring the Flats:

DEUSF -sprite -app NEWBIE.WAD

The -flat command is used to add only Flats, without the Sprites:

DEUSF -flat -add NEWBIE.WAD NEWBIE2.WAD


+ ******** 2) HOW to ADD or REMOVE SPRITE VIEWPOINTS
+
+ DeuTex allows you to alter the number of viewpoints a Sprite displays
+ in your PWAD. DOOM.EXE predetermines the 'behavior' of a given sprite
+ name, but it doesn't predetermine the number of viewpoints. A sprite
+ MUST, however, always have either ONE viewpoint or EIGHT viewpoints.
+ Viewpoints are numbered as follows:
+
+                                Front
+
+                                  1
+                            2     |     8
+                             \____|____/
+                             |         |
+                        3 -- | SPRITE  | -- 7
+                             |_________|
+                            /     |    \
+                           4      |     6
+                                  5
 

                                                                 page 12




+ The FULL NAME of the Sprite determines the viewpoint of that Sprite:
+
+                             BAR1A2.bmp
+                             \  /| \________________
+                              \/ |                  \
+              ________________/  |  The last number is the viewpoint. A
+             /                   |  zero here means the Sprite has only
+ The first four letters are the  |  one viewpoint. If not zero, there
+ Sprite Name as recognized by    |  MUST be 8 files for each 'frame' of  
+ DOOM.EXE. They are the same for |  the Sprite.
+ all entries of a given Sprite.  |
+                                 |
+          This is the 'frame' number of the Sprite. Animated
+          Sprites will have consecutive letters here for each
+          frame (A is frame one, B is frame two, etc.). DOOM.EXE
+          predetermines how many frames a Sprite uses, so you can
+          not animate an electrical column, for instance.
+
+ Sometimes, you will see a Sprite entry that has 2 viewpoints in one
+ Sprite, like BOSSA2A8. This means that the same Graphic is used for
+ viewpoints A2 and A8 (front-left and front-right). When DOOM sees
+ this, it uses the Graphic as is for A2, and mirrors it for A8.
+
+ In the above example BAR1 is the Barrel Sprite. DOOM does a 2 frame
+ animation on barrels (the slime flickers), so the whole entry is:
+
+      BAR1A0
+      BAR1B0
+  
+ This disregards the explosion (BEXP) Sprite
+ that is used when you shoot a Barrel.
+
+ If you want to change the Barrel Sprite to an 8 viewpoint
+ Sprite, you will need to create 16 Graphics:
+
+       BAR1A1
+       BAR1B1
+       BAR1A2
+       BAR1B2
+       BAR1A3
+       BAR1B3
+       BAR1A4
+       BAR1B4
+       BAR1A5
+       BAR1B5
+       BAR1A6
+       BAR1B6
+       BAR1A7
+       BAR1B7
+       BAR1A8
+       BAR1B8
+
+ This gives you 8 viewpoints for EACH frame of the animation. If you
+ only replaced BAR1A1 thru 8, you would see your new Graphic flash to a
+ barrel a couple of times a second, because you didn't replace the 2nd
+ frame. If you add a 3rd frame (BAR1C1 etc.), it will be ignored by
+ DOOM because DOOM.EXE already knows a barrel has only 2 frames.




                                                                 page 13




+ Alternatively, you could take an Imp and give it only 1 viewpoint by
+ taking only one of the views for each animation frame and naming it
+ TROOA0.bmp (with the correct letter for the frame you're using). The
+ Sprite will look kind of funny moving around, since it will only face
+ one direction the whole time.




                  ----------------------------------
 E)               How to create PWAD with new Sounds
                  ----------------------------------

First put your Sound files in the .\SOUNDS directory.
Then, declare the Sound NAMES in the [SOUNDS] section of WADINFO.TXT.
See APPENDIX IV for a listing of the Sound names recognized by DOOM.
Then build your PWAD:

DEUTEX -make WADINFO.TXT NEWBIE.WAD

Easy enough?

Sound effects: [DSxxxxxx.WAV or DSxxxxxx.AU]

Must be in WAV or AUDIO format (SUN). Make sure the format is *not*
compressed and does *not* contain comments. My code is pretty basic,
because I never had the specs of those formats. All is hacked.

PC speaker Sounds: [DPxxxxxx.TXT]

Text files containing a list of numbers from 1-255.

Music: [D_xxxxxx.MUS]

Must be in MUS format. Convert MIDI files to MUS files by using
the enclosed MIDI2MUS.EXE (thanks to -dtt-> of ID software).



 Since DeuTex 3.1:
 The '=' label lets your Sounds keep the names YOU have
 given them. It tells WADINFO.TXT what DOOM Sound you
 mean to replace. This will make your life easier.


















								 page 14




CHAPTER 4
************************** Visual Basic Shell **************************

		 -------------------------------------
			      WinTex.exe
		 This is the windows shell for DeuTex.
			      version 3.4
		 -------------------------------------


Visual Basic is slow, and Windows is very difficult to program
(not really complex, but real bug ridden) but anyway I've managed
to build quite a cool shell for my DeuTex.
I beleive so, because I had some good review of it lately, and some
people volunteered to help me write the help, and provide suggestions.


Let's just say that this tool is much better that whatever could exist
by march 95, even the great NWT tool for DOS.
It is better because not only Visual Basic allows to add plenty of
feature (well, maybe too many) in a short time, but also because it
can make use of external tools (what a DOS based program has more
troubles to do).

With WinTex, you can use your own level editor, sound editor, music
editor, picture editor, text editor, nodebuilder, reject builder,
and rely on good old DeuTex to make the tedious job of wad
composition and wad merging.

The windows part is only here for the presentation, not for the real
work, because windows is too unsafe for that!

WinTex is the best way to come to DeuTex, if you have Windows 3.1
(it is a 16-bit application, to spare you compatibility troubles)

You need VBRUN300.DLL in your windows/system directory, of course,
as this is a Visual Basic application.
























								  page 15




		    -----------------------------
		*** [PART TWO]   DETAILS, DETAILS ***
		    -----------------------------


CHAPTER 5
************************* DIRECTORY STRUCTURE *************************

DeuTex uses the following directory structure to store DOOM entries.
First create a directory (call it MYWADIR or whatever) for your PWAD.
Make sure DeuTex is on your path, or put a copy of it in MYWADIR. Put
a copy of the PWAD you are working on (MYWAD.WAD) in MYWADIR.

Type:        DeuTex -xtract mywad.wad

DeuTex will automatically create the appropriate subdirectories and put
all the WAD's entries in the proper place. It will also create a file
named WADINFO.TXT in MYWADIR. If your PWAD is a bare map Level with no
additions yet, you should get something like:

            \MYWADIR\--------mywad.wad
                    |        wadinfo.txt
                    |        DeuTex.exe (optional, if not on your path)
                    |_
                      \LEVELS\------ExMx.wad

Note that DeuTex will not OVERWRITE any existing files. In the example
above, if you type DeuTex -xtract AGAIN, you will get an error message
telling you the files already exist. You have to delete wadinfo.txt and
ExMx.wad (or move them somewhere else) for xtract to work again. If you
lose something you wanted to keep, don't blame DeuTex, it's innocent!

 Now type :   DeuTex <-doom doom directory> -dmtextures

DeuTex will read the Textures from DOOM.WAD or DOOM2.WAD, list them in
a file called OLDTEX1.TXT (and OLDTEX2.TXT for DOOM 1) and store them
in a directory called \TEXTURES, which it will create if it doesn't
exist.

NOTE: The <-doom doom directory> command is optional. Take a look at
      Chapter 6 - DEUTEX COMMANDS for a more complete description of
      when you should use it.

Your working directory should now look like this:

              \MYWADIR\-----mywad.wad
                      |     wadinfo.txt
                      |     DeuTex (optional)
                      |_
                      | \LEVELS\----ExMx.wad
                      |_
                        \TEXTURES\---oldtex1.txt
                                     oldtex2.txt


If your PWAD had any other resources (Sprites, Flats, Sounds, etc.) in
it and you used DeuTex -xtract, it would extract those resources, too.
Then it would create the proper directory and store them in it.



                                                                 page 16




If you want to add something to your PWAD, put it in the proper
subdirectory (create it if it's not there), and tell wadinfo.txt about
it. Chapter 8 - FORMATS describes wadinfo.txt in detail.

Then type: DeuTex -make wadinfo.txt mywad.wad

DeuTex will read wadinfo.txt and go get all the resources it asks for
from the directories. Then it will create mywad.wad from them. Note
that if you create a PWAD from the above example, it  won't be any
different than what you started out with! You need to put some
ingredients into the mix before you see any results. THAT's what the
other directories are for.

Again note that DeuTex won't overwrite mywad.wad if it exists. Since
most of the stuff you'll do with DeuTex will be from a batch file, have
it handle your housekeeping whatever way you like. Something like the
following works pretty well:

        del mywad.wad
        DeuTex -make wadinfo.txt mywad.wad
        copy C:\DOOM\WADS\mywad.wad mywad.bak
        copy mywad.wad C:\DOOM\WADS\mywad.wad

This way, if you find out you've really screwed things up when you test
your PWAD, there's always a copy of the previous version to use.
	
DEUTEX SUBDIRECTORIES:

                              --------
A)                             \LEVELS
                              --------

'Bare' PWADS go here! A bare PWAD is one that you have edited and
constructed the nodes, reject, and blockmap. The PWAD will then
contain only the following 11 entries in IT'S directory: ExMx(MAPxx),
THINGS, LINEDEFS, SIDEDEFS, VERTEXES, SEGS, SSECTORS, NODES, SECTORS,
REJECT, and BLOCKMAP.

BEWARE: BLOCKMAP REJECT SSECTOR SEGS are not optional! they must have
        been generated by your Level editor (along with BSP, IDBSP,
        REJECT, RMB, whatever).

 THE FILES PUT HERE MUST BE DECLARED IN THE [LEVELS] SECTION OF
 WADINFO.TXT. ALL FILES MUST BE IN THE FORM ExMx.WAD OR MAPxx.WAD OR
 EQUATED TO ExMx or MAPxx in WADINFO.TXT.

 Suppose you have edited two Levels named PLAGUE.WAD and E3M4.WAD. You
 want the combined PWAD to replace E1M2 and E3M4 in DOOM.WAD. You would
 edit the [LEVELS] section of WADINFO.TXT to read:

 [LEVELS]
 E1M2 =PLAGUE
 E3M4

 This tells DeuTex to look in the LEVELS\ subdirectory for PLAGUE.WAD
 and E3M4.WAD and to combine them in the final PWAD as E1M2 and E3M4.





                                                                 page 17




                               -------
B)                              \LUMPS
                               ------- 

Lumps are raw data for DOOM with the extension .LMP. If you have
edited or created any of them for your PWAD, put them here. The
following files are the LMPs used by DOOM. You can insert something
else if you like, and DOOM will ignore it. It's a mystery why anyone
would do this, but WAD builders are a mysterious bunch!

*********************** Lumps recognized by DOOM **********************

PLAYPAL.LMP   Color PALETTES (14 of them consisting of 256 RGB triplets
              each - 768 bytes/palette). The first one contains the
              normal DOOM colors. The others temporarily 'tint' the
              screen colors for different events in DOOM. (Item pickup,
              Hurt and Berserk Reds, Radsuit Green etc...)

COLORMAP.LMP  Color MAPS.  There are 34 of these,consisting of
              256 bytes each. These are NOT RGB triplets. They map
              whatever PLAYPAL currently being displayed by DOOM to
              darker colors corresponding to the light level in a
              sector. These mapped colors are what you see on the
              screen.  The first map (map 0) corresponds to a light
              level of 247-255, and doesn't change the display at all.
              The 32nd map (map 31) corresponds to a light level of 0-7
              and maps almost all colors to the darkest one in the
              presently use PLAYPAL. Map 32 makes everything black and
              white for 'invulnerability'. Map 33 is all zeros.

ENDDOOM.LMP   Text displayed when leaving DOOM. Use A program
              like TED or ENDOOMER to edit this text.
              (DO NOT REMOVE THE ID COPYRIGHT!)

DEMO1.LMP   / Demos recorded by DOOM.
DEMO2.LMP  <  e.g. DOOM -record DEMO2 -file MYWAD.WAD
DEMO3.LMP   \ Then move DEMO2.LMP here, and that's all!

DMXGUS.LMP    (DOOM1)    / Text file remapping MIDI instruments 
DMXGUSC.LMP   (DOOM2) \ for the Gravis Ultra Sound card.

GENMIDI       Instrument mapping for GENMIDI compatible cards.

***********************************************************************

Suppose you have edited ENDOOM.LMP and recorded a new DEMO1.LMP  for
your PWAD. Just put copies of them here, and declare them in the [LUMPS]
section of WADINFO.TXT like this:

     [LUMPS]
     ENDOOM
     DEMO1

	   This tells DeuTex to look here for ENDOOM.LMP and DEMO1.LMP

***********************************************************************

+ To replace heretic TITLE screen, put a 320x200 picture in the LUMPS
+ subdirectory and declare it as you would declare a TITLE lump.
+ DeuTex will know that it must convert it to the special RAW format.

                                                                 page 18




                             ----------
 C)                           \TEXTURES
                             ----------

 NOTE: DOOM1/HERETIC contains 2 Texture entries, TEXTURE1 and TEXTURE2.
     this is because of differences between the shareware and registered
     versions. If you are using DeuTex with DOOM2, just ignore any
     references to TEXTURE2. It doesn't exist in DOOM2.WAD.

 This subdirectory contains a text file(s) describing the Texture
 changes you want in your PWAD (Chapter 8 describes Texture definition
 files). Your file can be given any name you want (prefer TEXTURE1.TXT
 or TEXTURE2.TXT). This name (without extension) is then entered in the
 [TEXTURE1] section of WADINFO.TXT.

 FILES PUT HERE HAVE THE EXTENSION (.TXT). THE TITLE OF ANY FILE PUT
 HERE MUST BE DECLARED IN THE [TEXTURE1] SECTION OF WADINFO.TXT.

 The file names OLDTEX1.TXT and OLDTEX2.TXT are reserved. Due to an
 amazing bug (in DOOM?), if DOOM's Texture list contains any new or
 redefined Textures before all the UNCHANGED Textures are listed, it
 produces HOM (Hall of Mirrors) errors. Previous versions of DeuTex
 dealt with this problem by requiring a copy of TEXTURE1.TXT (with any
 redefined Textures deleted) here in the \TEXTURES subdirectory. This
 is no longer necessary with version 3.3. DeuTex now reads the original
 TEXTURE1 from the main IWAD while creating your PWAD. It then reads
 your new Textures and automatically sorts , deletes, and combines all
 entries. Olivier's too good to you guys >;-]

 EXAMPLES: 

 If you want to add ONLY new Textures:

    - Put your definition file here (e.g. TEXTURE1.TXT), and declare
      TEXTURE1 in the [TEXTURE1] section of (WADINFO.TXT).

 If you want to redefine Textures in TEXTURE1:

    - Run DeuTex -dmtextures to get the Textures.
    - Cut the Textures to be redefined from OLDTEX1.TXT and paste
      them into TEXTURE1.TXT. Edit them or change them as you wish.
    - You can delete OLDTEX2.TXT and OLDTEX1.TXT now if you want.
    - Declare TEXTURE1 in the [TEXTURE1] section of WADINFO.TXT.

 If you want to redefine Textures in TEXTURE2:

     - Run DeuTex -dmtextures to get the Textures.
     - Cut the Textures to redefine out of OLDTEX2.TXT and put
       them in TEXTURE2.TXT. Edit and change them as you wish.
     - You can delete OLDTEX1.TXT and OLDTEX2.TXT now if you want.
     - Declare TEXTURE2 in the [TEXTURE2] section of WADINFO.TXT.

APPENDICES I and II contain lists of the animated and switch Textures
from DOOM.WAD (Not the new ones from DOOM2, sorry. Use DeuTex to make
your own list). Copy the portion you want to edit into TEXTURE1.TXT.
It's a little easier than hunting through the entire OLDTEX1.TXT files.
Beware: some textures change a lot, between DOOM and DOOM2.




                                                                 page 19




                              --------------------
D)                             \SOUNDS and \MUSICS
                              --------------------

+ Put your new Sound files here in the correct format. They must have
+ the same name as the Sound you want to replace (Appendix IV lists the
+ Sound names used in DOOM1 and DOOM2. It also lists the Sound names for
+ each DMAUD Sound number). Put the Sound NAME (no extension) in the
+ [SOUNDS] section of WADINFO.TXT.

DeuTex uses the following formats for DOOM Sound files:

MUSIC:                      (D_xxxxxx.MUS)    for DOOM/DOOM2
                            (MUS_xxxx.MUS)    for HERETIC
MUS format (RAW format, which can be created from MIDI
files with MIDI2MUS.EXE, provided by ddt).

SOUNDCARD SOUND EFFECTS:    (DSxxxxxx.WAV)    for DOOM/DOOM2
                            (xxxxxxx.wav)     for HERETIC
Windows WAVE file (.WAV). Use a converter if you prefer .AU.
Preferably use 11025 sample/second for your recording.
VOC format is supported only for 11025 sample/s (DeuTex can't convert).

PC-SPEAKER:                  (DPxxxxxx.TXT)   only for DOOM
Text files (.TXT) with numbers 0-255 

WARNING: DeuTex assumes that any file name beginning with: 
                     'D_' or 'MUS_' is music.
                     'DS'           is soundcard sound effect.
                     'DP'           is PC speaker sound effect.
+ Suppose you've created new music for Level E1M5 called D_E1M5.MUS. You
+ also want to replace DSSHOTGN with a your file called PTOOEY.WAV. You
+ would put the files here and edit your WADINFO.TXT as follows:
+
+      [MUSICS]
+      D_E1M5
+      [SOUNDS]
+      DSSHOTGN =PTOOEY
+
+         This tells DeuTex to look here for D_E1M5.MUS and PTOOEY.WAV.
+         It will replace the Sound DSSHOTGN with PTOOEY.WAV

                             ----------
E)                            \GRAPHICS
                             ----------

For DOOM pictures other than Sprites, Flats or Textures. Put the
changed Graphic FILE here in .BMP or .GIF format, and enter the NAME
(without extension) in the [GRAPHICS] section of WADINFO.TXT.

Suppose you have created a new TITLEPIC.BMP, and want SURRENDR.BMP to
replace VICTORY2. Just put the files here and declare them in the
[GRAPHICS] part of WADINFO.TXT, like:
+
+    [GRAPHICS]
+    TITLEPIC
+    VICTORY2 = SURRENDR
+
+     DeuTex will look here for TITLEPIC.BMP and SURRENDR.BMP (or .GIF).
+     It will use SURRENDR.BMP for VICTORY2.

                                                                 page 20




************ Some examples of Graphic entries in DOOM.WAD *************

HELP1      The HELP screen for DOOM 1.666.
HELP2      Second HELP screen for DOOM 1.666.
HELP       The HELP screen for DOOM 2.
TITLEPIC   The title pic for Doom (320 x 200).
CREDIT     The credits for DOOM (Don't touch!).
VICTORY2   The background of the victory scenes.
STCFNxx    The fonts for DOOM.
STxxxxx    Description of the status bar.
M_xxxxx    Description of the menus.

You can read Matt Fell's DOOMSPEC for other entries, or extract
them for yourself with DeuTex -graphic -xtract DOOM.WAD.

			      ---------
F)                             \SPRITES
			      ---------

Put your new Sprites here in (.BMP) or (.GIF) format.

WARNING: DOOM WILL LOCK UP IF YOU ATTEMPT TO REPLACE ONLY SOME OF THE
	 EXISTING SPRITES! Either replace all the Sprites with DEUTEX
	 -iwad -make or replace only some of the Sprites and use DEUSF
	 -add, DEUSF -append or DEUTEX -merge.

 Suppose you want to redefine SPOSA1 and TROOB2. You want to replace
 them with SPOSA1.GIF and LIZARD.BMP. Put the files here, and then
 declare them in the [SPRITES] section of WADINFO.TXT, like:

      [SPRITES]
      SPOSA1
      TROOB2 =LIZARD

      DeuTex will look here for SPOSA1.BMP (or .GIF) and LIZARD.BMP.

			       -------
G)                              \FLATS
			       -------

For new floors and ceilings as 64x64 (.BMP) or (.GIF) files.

WARNING: TO USE YOUR NEW FLATS, YOU MUST MERGE YOUR PWAD WITH THE MAIN
	 IWAD, OR USE DEUSF TO PUT ALL THE IWAD FLATS INTO YOUR PWAD.

Sorry, but this is a limitation of DOOM, not of DeuTex. Flats inserted
here will not crash DOOM when the PWAD is run because I don't use the
regular F_START F_END delimiters that confuse DOOM. Your PWAD *WILL*
fail when it references those Flats, so heed the warning above.

 Suppose you want MUDDY.BMP as a new Flat, and HATCH.GIF to replace
 FLOOR1_7. Put the FILES here, and declare them in WADINFO.TXT, like:

      [FLATS]
      MUDDY
      FLOOR1_7 =HATCH

 DeuTex will look here for MUDDY.BMP and HATCH.BMP (Then HATCH.GIF),
 and replace FLOOR1_7 with HATCH.GIF. BUT, SEE WARNING ABOVE!


								 page 21




                              ---------
H)                             \PATCHES
                              ---------

Put new Patches here as (.BMP) or (.GIF). DeuTex will load ANY Patches
that have the same name as an existing Patch. They don't have to be
mentioned in MYTEXT.TXT. If you want the man in the danger symbol to be
a woman, edit the Patch, and throw it in here (use the same name). You
don't need to redefine all the Textures that contain it.

WADINFO.TXT contains NO [PATCHES] section. The Texture definition file
in \TEXTURES describes what Patches go in your new Textures. When DeuTex
reads WADINFO.TXT, it finds the name of your Texture definition file in
the [TEXTURE1] section (e.g. TEXTURE1). It finds the file TEXTURE1.TXT
in \TEXTURES and looks here for any Patches mentioned. Then it looks in
\PATCHES for pictures defining the patches.
      If you declare a NEW or MODIFIED Patch in TEXTURE1.TXT,
      there MUST be a corresponding .BMP or .GIF file in \PATCHES

EXAMPLE:

Suppose you want to create a new Texture called MYDOOR, which contains
two new Patches called WOODEN0 and KNOB0, and a modified WARNA0 Patch.
The new Texture also contains the existing EXIT1 Patch.

FIRST: Put WOODEN0.BMP, KNOB0.GIF, and WARNA0.BMP here. 

THEN: Define your new Texture in TEXTURE1.TXT as shown below:

      MYDOOR                256   128   ; a 256x128 wall with ...
      *     WOODEN0           0     0   ; a 256x128 background
      *     KNOB0            64   100   ; and a small knob at (64,100)
      *     WARNA0          128    12   ; a lite at top/center
      *     EXIT1           128    32   ; the word exit in the center

THEN: Put TEXTURE1.TXT in the \TEXTURES subdirectory.

THEN: Tell WADINFO.TXT that TEXTURE1.TXT is the file containing new or
      modified Textures by declaring it in the [TEXTURE1] section:

   [TEXTURE1]
   TEXTURE1

DeuTex will read TEXTURE1.TXT from \TEXTURES. TEXTURE1.TXT tells DeuTex
that a new texure called MYDOOR is 256 pixels wide, and 128 pixels high.
The asterisks tell DeuTex to look here for the Patches WOODEN0.BMP,
KNOB0.BMP, WARNA0.BMP and EXIT1.BMP. The numbers tell it where the
Patches go on MYDOOR. Note that WOODEN0 had better be 256x128 or bigger,
or there will be at least one void column, and DOOM will complain and
stop. If an existing Patch is called for, and no entry by that name
exists here, the old Patch will be used.

NOTE:
DeuTex automatically looks here for ALL Patches mentioned in the
generated TEXTURE entry. Normally it will check \PATCHES for all kind
of patches, new patches or patches redefining DOOM patches.
However, should DeuTex fail to recognise your modifed DOOM patches,
put this unrecognised patch in \GRAPHICS and declare it explicitly
in the [GRAPHICS] section of WADINFO.TXT.(The new version of DeuTex
never demonstrated such a bug, but you never knows, with DOS.)

                                                                 page 22




CHAPTER 6

*************************** DeuTex Commands ***************************

                      --------------------------
A)                    COMPLETE COMMAND REFERENCE
                      --------------------------

Actually it's not complete, but those commands not mentioned here
are for the Visual Basic Shell, and you'll never use them. Commands
with an '*' are not implemented in the VB version. I forgot them.
All optional commands must appear before non-optional ones or else
they will be ignored.

The Command Line Format is:

DEUTEX <-optional cmd.> ,..., <-non-optional cmd.>,...,etc.

                             -------------
B)                           HELP COMMANDS
                             -------------

  -help*   This one won't help you a lot, but it
           will give you the parameters.

  -syntax* Prints a short listing of the format of WAD creation
           directives (wadinfo.txt). See the FORMATS Chapter in
           this manual for a more complete explanation.

                          -----------------
C)                        OPTIONAL COMMANDS
                          -----------------

  -doom <doom directory>

            Use this command to indicate the directory containing
            DOOM.WAD and DOOM.EXE or DOOM2.WAD and DOOM2.EXE.

            If this command is not used, DeuTex looks first in the
            current directory for DOOM. Then it looks in the current
	    directory for DOOM2. Then it looks in the root directory of
            the current drive for a directory called DOOM, and finally
            looks in the root directory of the current drive for a
            directory called DOOM2. The first DOOM it finds is used. 

            EXAMPLE:    DEUTEX -doom C:\GAMES\DOOM

  -dir <working directory>

            DEFAULT IS: CURRENT DIRECTORY. This defines the working
            directory, into which you or DeuTex will put the WAD
            creation directives (WADINFO.TXT). All subdirectories
            containing PWAD parts will branch from here. The completely
            assembled PWAD will also reside here.

  -deu*     Use this if you want DeuTex to add 64K of junk at the end
            of your PWAD. Why? To compensate for a bug in DEU 5.21,
            that makes it sometimes crash when viewing pictures.
            That bug is corrected in DEU 5.3.


                                                                 page 23




  -rgb <R> <G> <B>

	   Let's you pick what *exact* color DeuTex will use for DOOM's
	   transparent color. The default is CYAN(R=0, G=255, B=255).

	   EXPLANATION:
	   DOOM allows transparent areas in textures. Although there
	   are 256 colors in the DOOM palette, only 255 of them act
	   as colors. Color number 247 (CYAN R=0 G=255 B=255) is used
	   by DOOM as a 'switch' to make that pixel invisible.

	   When DeuTex imports your new graphics into a PWAD, it must
	   assign each pixel one of the DOOM colors. For most of the
	   16 million colors possible in an RGB format such as .BMP
	   and .GIF, it is just a matter of finding the most appro-
	   priate colors in the DOOM palette to map to your graphic.
	   However, CYAN is more of a 'switch' than a color.It wouldn't
	   be appropriate for DeuTex to say "anything CLOSE to CYAN is
	   transparent". That would be like saying "anything close to
	   LINEDEF type 39 is a teleport". Transparency is a switch,
	   and has to be exact.

	   Some graphics programs may not be able to meet this re-
	   quirement. For example, some programs limit you to 64 (0-63)
	   increments each in Red, Green and Blue. They multiply the
	   result by 4 to get the true RGB value. This is fine for most
	   purposes, but not for DOOM.

	   In any such program, the closest you can get to CYAN is,
	   0 for Red, 63 for Blue and 63 for Green. When multiplied
	   to  get a true RGB value, this becomes R=0, G=252,B=252.
	   You couldn't tell the difference by looking, but DeuTex can.
	   It will take this value and say "Hmmm... Light Blue". Your
	   graphic will be disappointing when you see it in DOOM :-<
	   -rgb 0 252 252 will make you smile again :-)

	   Another example of when you might want to use this command
	   is if you use a raytracer to create your graphics. Most of
	   these programs render the background as black. If you use
           the option -rgb 0 0 0, things will be much easier.

  -bmp      File format to use when EXTRACTING pictures. DeuTex will
  -gif      recognize either one when STORING pictures in a PWAD. The
  -ppm      DOS version defaults to .BMP; the UNIX version defaults to
	    .GIF. Avoid the 24bit BMP format! Use 8bit (256 color) and
	    have the color quantization done by a serious program. Mine
	    works if you need it, but it's lame. See "What are the
	    Palettes For?" in Chapter 1.

  -wave     File format to use when EXTRACTING Sounds (DeuTex will
  -au       recognize either one when INSERTING Sounds). The DOS
  -voc      version defaults to .WAV; the UNIX version defaults to .AU.

  -fullsnd* If the real size of the Sound entry is larger than the
	    declared Sound length, -fullsnd enables you to extract
	    the complete Sound entry. It's almost never needed.





								 page 24




  -level    These tell DeuTex to select Sprites, Patches, Sounds, etc.
  -lump     when composing/decomposing/merging PWADS.  These commands
  -texture  can be combined.  By default, all entries are selected.
  -sound
  -graphic
  -sprite
  -patch
  -flat

  -iwad     To be used with -make, this command makes an IWAD instead
	    of a PWAD. This is necessary if you are building a PWAD
	    which contains all the Sprites and/or all the Flats. This
	    enables you to rebuild the DOOM.WAD if really needed.


		--------------------------------------
D)              COMMANDS TO COMPOSE OR DECOMPOSE PWADS
		--------------------------------------

  -wadir <thatcool.wad>

	    Directory list, with entry identification. Exact
	    entry identification is sometimes impossible in a
	    PWAD. In that case, Sprites, Flats or Patches might
	    be reported as Graphics.

  -xtract  <thatcool.wad>
  -extract <thatcool.wad>

	    Will extract Lumps, Graphics, Flats, Patches, Sprites,
	    Sounds and Levels from a WAD and put them into a sub-
	    directory having the same name (all .LMPs in \LUMPS, etc).
	    Also lists any Texture entries of the WAD in a file called
	    TEXTURE1.TXT, which it puts in a subdirectory called
	    \TEXTURES. If you are extracting the main DOOM1 WAD, a
	    second Texture file, TEXTURE2.TXT will be extracted. DOOM2
	    does not have a TEXTURE2 entry. If a given subdirectory
	    does not exist, it will be created. Also creates the file
	    WADINFO.TXT in the working directory. The working directory
	    is the directory the command is entered from unless -dir is
	    used to specify one.  See the Chapter 8 - FORMATS for a
	    description of WADINFO.TXT, TEXTURE1.TXT and TEXTURE2.TXT.
	    This command will not overwrite already existing entries.
	    It will complain and stop instead.


+  -get  <entry> <thatcool.wad>
+
+	    Will retrieve the entry called <entry> as picture, sound or
+	    lump, from <thatcool.wad>. if <thatcool.wad> is unspecified
+	    this default to the main WAD.
+	    This is no more than an emulation of DMGRAPH/DMAUD.

+  -usedtex  <thatcool.wad>
+
+	    This command will scan the level files in the PWAD, and report
+	    all the texture names that are affectively used.
+	    Use this when you convert PWADs from DOOM to DOOM2 or HERETIC
+	    so as to know which texture you really need.


								 page 25								 page 25




-make     <wadinfo.txt>  <myown.wad>
-build    <wadinfo.txt>  <myown.wad>
-create   <wadinfo.txt>  <myown.wad>

            Reads WADINFO.TXT and uses it to compose MYOWN.WAD from the
            files in the subdirectories. See FORMATS for a description
            of WADINFO.TXT. MYOWN.WAD will be created in the current
            directory. If it already exists, it WON'T be overwritten,
            so it must be deleted or moved to create a new version. This
            command replaces DMGRAPH, DMMUS, DMTEX and DMAUD. (DMAUD
            recognises more formats than .WAV and .AU, but it doesn't
            work with DOOM v1.666 or DOOM2).

-check  <myown.wad>

          Will look for any Textures defined in MYOWN.WAD which contain
          void columns that would crash DOOM. Use this after modifying
          Textures (Similar to the way you use checks in DEU).

-unused <thatlame.wad>

          Checks for unused bytes in a PWAD. Reports all the unused
          zones, total number of byte wasted, and the repartition
          depending on size of wasted areas.


             ---------------------------------------------
E)           COMMANDS FOR MERGING PWADs INTO THE MAIN IWAD
             ---------------------------------------------


-merge  <myown.wad>

            Will put the entries of MYOWN.WAD into the main DOOM.WAD
            file, thereby removing all restrictions DOOM puts on PWADS.
            This is much safer and much cleaner than inserting or
            restoring entries with DMGRAPH or such, but your IWAD IS
            modified. Usually used for Sprites and Flats.

-restore    Will restore DOOM.WAD and the merged MYOWN.WAD.  To be
            used after the -merge command, to undo the job. Files are
            reconstructed using information stored in the IWAD at the
            time the -merge is done.

+ -join     These DeuSF commands are also available for DeuTex
+ -app      -join merges two PWADs, -app appends Sprite and Flats 
+ -add      and -add does the same, but in a new PWAD

NOTE ON SAFETY:
                - ONLY 8 BYTES of DOOM.WAD are modified
                - If all else fails, you can restore your IWAD by hand.
                - Only about 32k of additional disk space are needed.
                - MYOWN.WAD is put INTACT into DOOM.WAD. It can then be
                  deleted since -restore recreates it. This is barely a
                  modification at all!






                                                                 page 26




How does it work?

     - Restoration information is added at the end of the IWAD.
     - Then the PWAD is pasted intact at the end of the IWAD.
     - The IWAD directory is rebuilt (about 32K) and appended.
     - The pointer to the DOOM directory is modified (8 bytes).

After all that mess, a directory entry called _DEUTEX_ is added. it is
of no use for DOOM/HERETIC, and is just ignored. But if you modify
your WAD with some other tool, this entry will still point to the
restoration information, enabling DeuTex to salvage the WAD.

I did my best to make this command the safest possible. I have tested
this command thoroughly and believe it can be trusted. Be aware,
however, that the resulting IWAD might not work with DOOM if the
included PWAD does not respect some conventions about Sprites and
Flats. If this happens, the files are still safe, just -restore them.

The conventions a PWAD must follow are:

	-There must be F_START or FF_START before the first Flat.
	-There must be S_START or SS_START before the first Sprite.

Sorry, but there is NO OTHER WAY if we want to be able to add new
Sprites and Flats that are unreferenced in DOOM.WAD.
It would be vain to compare the sprites names with those of the IWAD,
because it's DOOM.EXE that determines which sprites are which, not
the IWAD. And as DOOM.EXE can be hacked, and sprites vary with versions
of DOOM, there is really no other choice.
































                                                                 page 27




CHAPTER 7
*************************** DeuSF Commands ****************************

                              --------
A)                            OVERVIEW
                              --------   

DeuSF is an improved replacement for DMADDS.  It adapts to all versions
of DOOM, requires a less perverted PWAD structure, and can append to a
PWAD rather than generating a new PWAD (thereby saving space). DeuSF
works with PWADs composed for DMADDS, and should work for ones composed
for DMADDF. Of course, the PREFERRED PWAD composer for DeuSF is DeuTex!

The code for DeuSF is 80% the same as that of DeuTex. The DeuSF -app
command is just a modified version of the amazing DeuTex -merge command
(the ONLY command that removes ALL PWAD limitations :->)

DeuSF need only be applied to PWADS that contain:

	-some Sprites to replace those of DOOM.WAD.
	-some Flats to replace those of DOOM.WAD.

DeuSF need NOT be used if:

	- the PWAD contains *all* the Sprites of DOOM.WAD
	- the PWAD contains *all* the Flats of DOOM.WAD
	- the PWAD contains Sprites which are not referenced in 
	  DOOM.EXE. (a DeHacked patch is needed to have them work)

DeuSF can only be used on PWADs that respect a precise format:

 - Sprites are identified only if comprised between:

          S_START or SS_START    and    S_END or SS_END 

 -Flats (floor/ceilings) are identified only if they occur between:

          F_START or FF_START    and    F_END or FF_END  

If this format is NOT respected, DeuSF fails to identify entries
correctly. This is because in IWAD and PWAD entries there is nothing
internal to a Sprite or Flat that identifies it as such. This format is
generated by DeuTex automatically, and is compatible with DMADDS.

DeuSF is meant to be distributed with your PWAD, so it has no
restrictions on distribution (Unlike DeuTex, see License Section). This
lets you send DeuSF with your PWAD, along with a batch file like the
one in the following example. Your PWAD contains new Sprites and Flats,
but not all of them. Your batch file might read:

          DeuSF -app mywad.wad
          DOOM -file mywad.wad -warp x x
          DeuSF -res mywad.wad

First, DeuSF appends the Sprites and Flats from DOOM.WAD to mywad.wad.
Then the PWAD is played. The last command deletes the appended Sprites
and Flats from mywad.wad, restoring it to it's original condition.
This kind of PWAD should PREFERABLY be built with DeuTex.



                                                                 page 28




An example of DeuSF usage on ALIENDOOM 2.2:

 DeuSF -doom c:\doom -sprite -add ALIENGFX.WAD ALINGRFX.WAD

 DeuSF reads ALIENGFX.WAD to find what Sprites are missing. It then
 extracts them from DOOM.WAD and creates a new PWAD, ALINGRFX.WAD from
 the original PWAD and the extracted Sprites. DOOM.WAD and the original
 ALIENGFX.WAD are unchanged.

Even better:

 DeuSF -doom c:\doom -sprite -app ALIENGFX.WAD > aliengfx.log

 DeuSF reads ALIENGFX.WAD to find what Sprites are missing. It then
 extracts them from DOOM.WAD and appends them to ALIENGFX.WAD. DOOM.WAD
 is unchanged. If -res doesn't work for any reason, ALIENGFX.WAD can be
 restored by hand from the information in aliengfx.log

 You *should* take the time to evaluate this tool even if you're
 not convinced at all. Trust that this time won't be wasted.
 DeuSF -join, -merge, -app, -res commands are incredibly more
 powerfull than those of DMADDS. NWT -as and -af duplicate some of the
 features of DeuSF, but isn't par to DeuSF yet.
 Great care involved in designing those DeuSF functions, and DeuSF in not
 only the most powerfull, it's also the only one ported to other O/S.
 Let me insist that you should use DeuSF to install your WADs.

                      --------------------------
B)                    COMPLETE COMMAND REFERENCE
                      --------------------------

 All optional commands must appear before all
 non-optional ones. Otherwise, they are ignored.

Command Line Format:
DeuSF <optional cmd.>,...,<non-optional cmd.>,...,etc.


******** 1) HELP COMMANDS

  -help     Lists these parameters.

  -format   Displays a summary of the format conventions
            a PWAD must follow so that DeuSF can recognize
            Sprites and Flats properly.

  -wadir <thatcool.wad>

            Scrolls the entries in the PWAD directory down the screen,
            along with what type DeuSF thinks each entry is (Sprite,
            Flat, Graphic, etc.). For a PWAD with many entries, you
            may want to pipe this command (i.e. DeuSF -wadir | more)
            to ease readability. Used to check if DeuSF recognises all
            the entries correctly, for instance when there is a problem
            with -app or -add.






                                                                 page 29




******** 2) OPTIONAL COMMANDS



  -doom <doom directory>

            Use this command to indicate the directory containing the
            DOOM.WAD and DOOM.EXE you want to use. See the description
            in  the DeuTex command reference for default information.

            For example:      DeuSF -doom C:\GAMES\DOOM

  -sprite   Use with -add or -app, to add only Sprites or only Flats. If
  -flat     neither of these commands is present, DeuSF will add both.




******** 3)  MANDATORY COMMANDS (one of these will always be used)



-add  <myown.wad> <allsf.wad>

            Will create a new file, ALLSF.WAD, containing all the
            Sprites and/or Flats of DOOM.WAD together with those
            contained in MYOWN.WAD. This is exactly like DMADDS
            ...but cleaner.

-app  <myown.wad>

            Will append to MYOWN.WAD only those Sprites and/or Flats
            of DOOM which are not redefined. This saves disk space,
            compared to -add command.

+ -join <this.wad> <that.wad>
+
+         Will append to THIS.WAD all the Sprites and Flats contained in
+         THAT.WAD. This function enables you to merge two Sprite and/or
+         Flats PWADS obtained from different sources. I added this
+         command so that I could play CHOOK and BARNEY together.
+         TEXTURES and PNAMES entries of both THIS.WAD and THAT.WAD.
+         If entries are conflicting, thoses of THAT.WAD have priority.
+         Avoid conflicts! -join is not really clever.
+
+         NOTE: After using -join on PWADS, you still have to
+               use -app on the combined PWAD to append the
+               remaining Sprites and Flats from DOOM.
+
+ -res <myown.wad>
+
+          Restores a PWAD which had been modified with -app command.
+          Quite safe. Performs the same function as -restore in DeuTex.
+          If a PWAD was merged inside another one (using -join), then
+          that PWAD regenerated also. Now *that's* real cool!






								 page 30




CHAPTER 8

******************************* FORMATS *******************************

                      ----------------------------
A)                     The WAD Creation Directive
                              WADINFO.TXT
                      ----------------------------

******** 1) OVERVIEW

The creation directive file is used by the DeuTex -make command to
compile a PWAD containing all of the desired enhancements. It is
automatically generated by the -xtract command and placed in the
working directory (e.g. MYWAD\). You can rename this file whatever you
like, and reference it when you use the -make or -merge commands.

+ The file lists most of the entries which will be present in the PWAD
+ file (with the exception of PATCHES and PNAMES, see note below). It is
+ structured similarly to a Windows .ini file with sections headed by
+ names enclosed in brackets.It contains up to 7 sections: [LEVELS],
+ [LUMPS], [TEXTURE1], [SOUNDS], [GRAPHICS], [SPRITES] and [FLATS].
+ For DOOM1, there can be an eighth section called [TEXTURE2].
+
+ All sections are optional. Starting with DeuTex version 3.0, the order
+ of the sections is not critical. The name of the section IS critical,
+ and must be spelled correctly.

NOTE: There is no [PATCHES] section. Patch loading is automatic. If a
      new Patch is referenced in a Texture, DeuTex will look for it in
      \PATCHES. If there is a Patch in \PATCHES with the same name
      as an existing Patch, DeuTex will automatically find it and load
      it. There is no need to reference a redefined Patch in a Texture
      definition, unless it is part of a new or redefined Texture. There
      is also no need to define PNAMES. PNAMES creation is automatic.

 The names TEXTURE1 and TEXTURE2 refer to the OLDTEX1.TXT and
 OLDTEX2.TXT files as extracted from DOOM. Unlike previous versions,
 DeuTex doesn't need these files. They exist only for you. They are
 useful in examining the makeup of textures in the WAD. They also make
 redefining existing Textures easier by allowing you to cut and paste
 instead of typing the redefined Texture from scratch. DeuTex 3.3 takes
 all the information on existing Textures directly from the main WAD
 while building your PWAD. Any new definitions supplied by you will
 override those in DOOM. A warning will be given to inform you of this.
 This is a great improvement and makes DeuTex even easier than before!

 Previous versions of this manual also generated confusion over where,
 how, and if you need to use OLDTEX2.TXT (then named TEXTURE2.TXT)
 The short answer from now on is: NOWHERE, NOHOW and NO!

 Since DeuTex 3.1, [TEXTURE1] and [TEXTURE2] are separate sections.
 There is ONLY ONE case where you will use [TEXTURE2]. This is when you
 are using DOOM1 and you redefine a TEXTURE2 Texture. OLDTEX2.TXT does
 NOT need to be present, even in this situation. Use it for your edits.

 If your PWAD is for DOOM2, or is for DOOM1 and doesn't change any
 TEXTURE2 Textures, IGNORE all references to TEXTURE2 in this document! 



								 page 31




******** 2) EXACT FORMAT for WADINFO.TXT



 The following pages show the exact format for all the entries in a
 PWAD Creation Directive File (i.e. WADINFO.TXT or YOURNAME.TXT).
 All main sections are optional. Order of sections is unimportant.


 The Symbols used in the Format Listing are as follows:


   SYMBOL                    DEFINITION
_______________________________________________________________________
|                        |                                            |
| x and y                | Numbers for offsets, levels, etc.          |
|________________________|____________________________________________|
|                        |                                            |
| aaaa, bbbb and cccc    | YOUR name for a given item (8 char max).   |
|________________________|____________________________________________|
|                        |                                            |
| qqqq, rrrr and ssss    | VARIABLE parts of a DOOM name.             |
|________________________|____________________________________________|
|                        |                                            |
| CAPITAL LETTERS        | MANDATORY parts of an entry.               |
|________________________|____________________________________________|
|                        |                                            |
| DOOM name '=' aaaa     | DeuTex will insert 'aaaa' as 'DOOM name'.  |
|________________________|____________________________________________|
|                        |                                            |
| brackets [ ]           | Define main sections in the file.          |
|________________________|____________________________________________|
|                        |                                            |
| parentheses ( )        | These entries are optional.                |
|________________________|____________________________________________|
|                        |                                            |
| asterisk    '*'        | Reuse the resource from the previous line. |
|________________________|____________________________________________|
|                        |                                            |
| dot+comma  ';'         | 'Comment' follows. (Windoze standard)      |
| pound sign  '#'        | 'Comment' follows. Rest of line ignored.   |
|________________________|____________________________________________|
|                        |                                            |
| 'white space' (spaces) | Ignored by DeuTex.                         |
|________________________|____________________________________________|
















								  page 32




              Listing of the Format for WADINFO.TXT:

 ;
 ; DeuTex by Olivier Montanuy (montanuy@lannion.cnet.fr)
 ;
 ;  PWAD creation directives
 ;
 ;
 [LEVELS]       ; Section to define the Level of your map(s).
 ;
 MAPxx (=aaaa)  ; If '=aaaa' and '=bbbb' are used, looks in \LEVELS for
 ExMy  (=bbbb)  ; aaaa.WAD and bbbb.WAD. If '=aaaa' and '=bbbb' are not
                ; used, looks in \LEVELS for MAPxx.WAD and ExMy.WAD.
                ; Combines them into one PWAD containing MAPxx and ExMy
                ;
                ; DeuTex does not care about the internal Level of
                ; aaaa.WAD or MAPxx.WAD. It will output the PWAD as
                ; whatever MAPxx or ExMy is put here. Easy conversion.
                ;
                ; ExMy can be E1M1 thru E3M9.
                ; MAPxx can be MAP01 thru MAP35.
                ; MAPS 33, 34 and 35 will play, but can only be entered
                ; by IDCLEV. An EXIT LEVEL switch on 33, 34 and 35 will
                ; just return you to DOS.
                ;
                ; If ExMy and MAPxx are entered in the same PWAD, ExMy
                ; will play from DOOM1 and MAPxx will play from DOOM2,
                ; IF there are no Texture additions to the PWAD. It is
                ; still possible with Textures, but is a can of worms,
                ; and you'd better know what you're doing.
                ;
                ; Thus, it is possible to make a 62 Level PWAD with
                ; DeuTex, although some imagination would be needed to
                ; overcome the limitations of Levels 33, 34 and 35 in
                ; DOOM2, and only about half the wad would be available
                ; to each DOOM engine. This may be useless, but since
                ; it's possible, it is included here.
 ;
 ;
 [LUMPS]       ; Section to define any .LMP data you want to add.
               ; Chapter 5, Section B) describes Lumps.
 ;
 qqqq (=aaaa)  ; If '= aaaa' is used, looks in \LUMPS for aaaa.LMP. If
               ; '= aaaa' is not used, looks for qqqq.LMP. Installs the
               ; .LMP data in the PWAD to replace qqqq in DOOM.
 ;
 rrrr    (*)   ; If '*' is used, .LMP from the previous entry is used
               ; for this entry as well. When you play the PWAD, qqqq
               ; will be used for both qqqq AND rrrr.
 ;
 ;










								page 33




 [TEXTURE1]  ; Section for declaring what Texture definition files you
             ; want to use when compiling your PWAD.
 ;
  aaaa       ; First loads TEXTURE1 from the main DOOM or DOOM2 WAD.
 (bbbb)      ; Then looks in \TEXTURES for aaaa.TXT. Compiles your PWAD
 (cccc)      ; Texture directory by: TEXTURE1 - (redefined Textures in
             ; aaaa.TXT)+(ALL textures in aaaa.TXT) = TEXTURE1 in PWAD.
             ;
             ; If 'bbbb' and 'cccc' are used, DeuTex searches for
             ; bbbb.TXT in \TEXTURES, RE-edits the TEXTURE1 entry using
             ; it, then gets cccc.TXT and repeats the process. This
             ; means that if any duplicate Texture names exist in aaaa,
             ; bbbb and cccc, only the entry from the last file listed
             ; will be present in the final PWAD.
 ;
 [TEXTURE2]  ; Used only for DOOM1. Shows what Texture definition
 aaaa        ; file(s) to use for TEXTURE2. Similar to above.
 ;
 ;
 [SOUNDS]        ; Section to define your modified Sound entries.
 ;
 DSqqqq (=aaaa)  ; If '=aaaa' is used, looks in \SOUNDS for aaaa.WAV
                 ; (Sound effect). If '= aaaa' isn't used, looks for
                 ; DSqqqq.WAV. Uses file to replace DOOM sound DSqqqq.
 ;
 DPqqqq (=aaaa)  ; If '=aaaa' is used, looks in \SOUNDS for aaaa.TXT
                 ; (PC Speaker Sound). If '= aaaa' is not used, looks
                 ; in \SOUNDS for DPqqqq.TXT. Uses file to replace
                 ; DOOM PC Speaker Sound DPqqqq.
 ;
 D_qqqq (=aaaa)  ; If '=aaaa' is used, looks in \SOUNDS for aaaa.MUS
                 ; (Music file in  DOOM's .MUS format). If '=aaaa' is
                 ; not used, looks for D_qqqq.MUS. Uses file to replace
                 ; DOOM Music D_qqqq.
 ;
 D_rrrr   (*)    ; If '*' is used, the Sound from the previous entry is
                 ; used for this entry as well. In this example, when
                 ; you play your PWAD, D_qqqq will be used for both
                 ;  D_qqqq AND D_rrrr.
 ;
 ;
 [GRAPHICS]             ; Section used to declare Graphics other than
                        ; Sprites, Flats, or Textures. See Chapter 5,
                        ; Section E) or Matt Fell's DOOM SPECs for a
                        ; description of Graphic entries in DOOM.
 ;
 qqqq (xx)(yy) (=aaaa)  ; If '=aaaa' is used, looks in \GRAPHICS for
                        ; aaaa.BMP. If not found, looks for aaaa.GIF.
                        ; If '=aaaa' is not used, looks for qqqq.BMP
                        ; or .GIF. Inserts the file in PWAD for entry
                        ; qqqq. xx and yy are the horizontal and
                        ; vertical offsets used when inserting the
                        ; Graphic into it's defined area. The defined
                        ; defined area is predetermined by DOOM.EXE
                        ; from the Graphic name.
                        ;





							       page 34




                        ; For example, all Graphics beginning with STF
                        ; are placed in a box 31 x35 pixels big at the
                        ; center of the Status Bar. This is where the
                        ; player's face shows up. The xx and yy values
                        ; move the Graphic around in this box. Pos-
                        ; itive values move it left (xx) and up (yy).
 ;
 rrrr        (*)        ; If '*' is used, will re-use the Graphic from
                        ; the previous line for rrrr too.
 ;
 ;
 [SPRITES]              ; Section used to declare Sprites. Consult the
                        ; following for more information on modifying
                        ; Sprites in DOOM:
                        ;   Chapter 3 - Section C)
                        ;   Chapter 5 - Section F)
                        ;   Chapter 6 - Section E)
                        ;   Chapter 7 - All Sections
 ;
 qqqq (xx)(yy) (=aaaa)  ; If '=aaaa' is used, looks for aaaa.BMP or
                        ; .GIF in \SPRITES. If '=aaaa' is not used,
                        ; looks for qqqq.BMP or GIF. Inserts the file
                        ; into the PWAD to replace the Sprite qqqq.
 ;
 rrrr          (*)      ; '*' tells DeuTex to use the previous entry
                        ; (qqqq) for this Sprite as well.
 ;
 ;
 [FLATS]       ; Section for declaring modified Flats. Limitations
               ; are similar to the ones for modifying Sprites. See
               ; [SPRITES] section above for places to find info.
 ;
 qqqq (=aaaa)  ; If '=aaaa' is used, looks for aaaa.BMP or .GIF in
               ; \FLATS. If '=aaaa' is not used, looks for qqqq.BMP or
               ; .GIF. Inserts file into PWAD as replacement for qqqq.
               ;
               ; There are no insertion points for Flats, since they
               ; all MUST be 64x64.
 ;
 ;
 ; End File.




















								page 35




******** 3) An EXAMPLE LISTING of WADINFO.TXT 

The following is a commented example of PWAD creation directives,
A space or any text after a ';' or '#' to the end of a line is ignored.
Not all entries need be present, and order of [SECTIONS] is optional.

************************ WADINFO.TXT *****************************
;
; The [LEVELS] section defines the DOOM1 Levels and DOOM2 maps.
;
[LEVELS]
E1M2                    ;file loaded: LEVELS\E1M2.WAD
MAP04                   ;file loaded: LEVELS\MAP04.WAD
E2M3 =TRINITY		;file loaded: LEVELS\TRINITY.WAD
			;if more than one Level, E2M3 is read
;
;          All .WADs referred to here must contain the 11 entries that
;          define a Level, including NODES, BLOCKMAP and REJECT. Use
;          IDBSP and RMB to build them.
;
; The [LUMPS] section defines the Lumps of raw data for DOOM.
;
[LUMPS]
ENDOOM                   ;file loaded: LUMPS\ENDOOM.LMP
DEMO1                    ;file loaded: LUMPS\DEMO1.LMP
DEMO2 =KILLJOHN          ;file loaded: LUMPS\KILLJOHN.LMP
;
; See Directory Structure - LUMPS\ for a precise description of all
; these entries. Apart from the DEMO or possibly ENDOOM, there is no
; real need to mess with them. DEMOs can be recorded by DOOM.
;
; The [TEXTURE1] section lists the names of the Texture definition files
; from \TEXTURES that are to be used for TEXTURE1.
;
[TEXTURE1]        ;DeuTex will first read TEXTURE1 in DOOM.WAD
;
TEXTURE1	  ;file read: \TEXTURES\TEXTURE1.TXT
MYWALLS           ;file read: \TEXTURES\MYWALLS.TXT
MYSWITCH          ;file read: \TEXTURES\MYSWITCH.TXT
;
;     The new Textures found in these files are placed at the end of the
;     Texture list. If they have the same name as an entry in OLDTEX1,
;     (that is: the old DOOM texture) then that entry is deleted.
;
; The [TEXTURE2] entry is not needed for DOOM2
;
[TEXTURE2]        ;DeuTex will first read TEXTURE2 in DOOM.WAD.
;
TEXTURE2            ;file read: \TEXTURES\TEXTURE2.TXT
;
;     The new Textures found in this file are placed at the end of the
;     Texture list. If they have the same name as an entry in TEXTURE2,
;     that entry is deleted.
;
;         BEWARE: don't duplicate TEXTURE1 entries in TEXTURE2.
;                 DOOM Doesn't care, but it crashes some Level
;                 editors.
;



								 page 36




; The [MUSICS] section defines MUSIC
;
D_E2M3            ;file loaded: SOUNDS\D_E2M3.MUS   (doom1 music).
D_RUNNIN          ;file loaded: SOUNDS\D_RUNNIN.MUS (doom2 music).
D_ROMERO	*     ;no file loaded! The '*' copies D_RUNNIN to D_ROMERO.
		  ;now DOOM will think D_ROMERO=D_RUNNIN.
D_SHAWN3 =KATEBUSH      ;file loaded: SOUNDS\KATEBUSH.MUS.
			;The music for SHAWN3 will be KATEBUSH.
;
;   D_E2M3 is the music for Episode2 Mission 3 of DOOM.
;   In DOOM2, it's a real mess. The Music name is not related
;   to the Level name, but to the guy who made the Level.
;  MUS format can be obtained from MIDI with MIDI2MUS, or
;  converted back to MIDI by MUS2MIDI (by just_joe).
;  These are separate utilities (too technical for DeuTex)
;
; The [SOUNDS] section defines PCSOUNDS and WAVE SOUNDS
;
[SOUNDS]
DSSLOP                  ;file loaded: SOUNDS\DSSLOP.WAV, .AU or .VOC
DSPISTOL =BOIING        ;file loaded: SOUNDS\BOIING.WAV, .AU or .VOC
			;this is a WAV Sound, meant for sound cards.
;
DPSLOP                  ;file loaded: SOUNDS\DPSLOP.TXT
			;this is a PC speaker Sound.
;
;     The WAV, AU and VOC format were hacked.
;     DeuTex can't read compressed data.
;     The format PC-speaker Sound is a list of integers
;     (range 1-255). related to sound pitch...
;
;
; The [GRAPHICS] section defines all the fixed pictures.
; (Not Sprites, Patches, or Flats)
;
[GRAPHICS]
WIMAP1                         ;file loaded:  GRAPHICS\WIMAP1.BMP.
STHURT1    23    45            ;file loaded:  GRAPHICS\STHURT1.BMP.
			       ;set the insertion point to 23,45.
STHURT2           *            ;DOOM will use STHURT1 for STHURT2.
VICTORY2   0     12 =SULACCO   ;file loaded: GRAPHICS\SULACCO.BMP
			       ;set the insertion point to 0,12.
			       ;SULACCO.BMP will now replace VICTORY2.
;
; Fixed pictures include: opening screen,
; texts (!), menus, status bar, ending pictures ...
; You can only use names already defined in DOOM.
; Otherwise DOOM will ignore them. (you'll be warned :-)
;
; This section declares the Sprites.
;
[SPRITES]
BOSSB1                      ;File loaded: SPRITES\BOSSB1.BMP or .GIF
			    ;calculate insertion point by itself.
BOSSA1   10  20		    ;File loaded: SPRITES\BOSSA1.BMP or .GIF
			    ;set the insertion point to 10,20.
BOSSA2A8    *               ;DeuTex will set BOSSA2A8 equal to BOSSA1
VILEA1   30   40 =BILLGATE  ;File loaded: SPRITES\BILLGATE.BMP or .GIF
			    ;VILEA1 will now be BILLGATE.BMP


								 page 37




; If you redefine ALL Sprites, use the -iwad option.
; Otherwise, you'll have to use DeuSF to rebuild a complete Sprite PWAD
; each time the WAD is played. This is because of a limitation of DOOM
; which still has not been removed (ask ID software about it).
;
;
; Don't declare your Patches.
; A Patch, say xxxx, will automatically be loaded into
; the PWAD from the file PATCHES\xxxx.BMP (or .GIF) if:
;
;         'xxxx' is referenced in one of the Texture files, as a Patch.
;      or 'xxxx' exists as a Patch in the original DOOM.
;
;
;
; The [FLATS] section declares the Floors and Ceilings
;
[FLATS]
GRASS                 ;file loaded: FLATS\GRASS.BMP (or .GIF)
HERBE       *         ;DOOM will think HERBE is the same as GRASS
BLOOD1 = MUDDY        ;file loaded: FLATS\MUDDY.BMP
		      ; All these files must be 64x64 pixel pictures.
;
; You can define new Flat names, or redefine existing Flats, but unless
; you redefine the complete list of Flats, and use the -iwad option, you
; need to use DeuSF to rebuild the complete Flat list whenever you want
; to use the PWAD.
;
;
; WAD creation directives end here.
;






























							    page 38




                  -----------------------------------
B.                 The Texture Definitions Text File
                         \TEXTURES\MYTEXT.TXT
                  -----------------------------------

******** 1) OVERVIEW

Some Notes on Texture definitions:

     - READ the DOOM SPECS by Matt Fell.
     - You can create Textures for transparent walls (see DeuTex
       Commands -rgb), but make sure that they're composed of only
       one Patch. Otherwise, you'll get the Medusa Effect.
     - Avoid using a Texture less than 128 pixels high on a
       wall higher than the Texture (Tutti Frutti effect).
     - Texture widths should be rounded to the next power
       of 2. (8,16,64,128,256,512,1024 are usable)
     - Patches composing Textures can not be more than 320 pixels wide.
     - DOOM will ignore any portion of Textures higher than 128 pixels. 
     - You can create a non repeating sky Texture:
       Define the SKY1 (or SKY2, SKY3, RSKY1, RSKY2, RSKY3) entry as a
       1024x128 area cover it with Patches. Note that SKY Patches appear
       horizontally inverted. 0=east,  256=north, 512=west, 768=south.
     - Make sure all Textures are completely covered by Patches.
       Otherwise, DOOM will puke (void column error).
     - You can create animated walls with (almost) any sequence of
       pictures. No known limit in the number of frames (27 is OK!).
       The way to do this is:
       Edit the Textures of one of DOOM's existing animated walls
       (beginning and end). Use the original names for these entries.
       They are coded into DOOM.EXE. Add the other frames for your
       animation between these entries in your Texture list.
     - READ the DOOM SPE.... Well, you get the picture >;-{]>

Once you have created a new PWAD, check it with the -check command.
DeuTex will complain if:

     - Any Texture width is NOT a power of 2 (2,4,8,16,32,64,128,etc).
       (DOOM will round to the next lower power of 2)
     - Any Texture height is greater than 128.
	 (DOOM ignores everything above 128)
     - Any Texture is not completely covered by Patches.
       (DOOM will exit with a void column error)
     - A Level tries to use of an undefined Texture.

A Texture entry consists of:

(Texture Name)      (WIDTH) (HEIGHT)
*     (Patch1)    (X offset)(Y offset)
*     (Patch2)    (X offset)(Y offset)
*     (Patch3)    (X offset)(Y offset)
 .          .          .         .
 .          .          .         .
 .          .          .         .
*     (PatchN)    (X offset)(Y offset)

This format is supported by both New Wad Tool and the Visual Basic
shell for DeuTex, so use the one you prefer, to build your Textures.



							   page 39




Texture Names are 8 characters or less.
Width and Height are in pixels.
An asterisk '*' identifies the following word as a PNAME.
Patch Names are 8 characters or less.
X and Y offsets are pixel measurements.
Offsets are measured from upper-left corner (0,0).
X = positive. Offset Patch to the right.
X = negative. Offset Patch to the left.
Y = positive. Offset Patch down.
Y = negative. Offset Patch up.






The following figure is a feeble attempt to illustrate this:





 _______________________  
|                       | ^
| PATCH 1               | | 
| Both x and y          | Y  
| have negative         | |
| offsets.       _______|_v_______________________________________    
|               |       |              ^                          |   ^
|               |       |              |          TEXTURE         |   |
|               |       |              |                          |   |
|               |       |              Y                          |   |
|               |       |              |                          |   |
|_______________|_______|              |                          |   H
                |                    __v_______________________   |   E
 <----- X ----->|                   |                          |  |   I
                |                   |     PATCH 2:             |  |   G
                |                   |     Both x and y have    |  |   H
                |<------- X ------->|     positive offsets.    |  |   T
                |                   |                          |  |   |
                |                   |                          |  |   |
                |                   |                          |  |   |
                |                   |__________________________|  |   |
                |                                                 |   |
                |_________________________________________________|   v
                                                                      
                 <-------------------- WIDTH --------------------->



                TEXTURE DEFINITION SHOWING PATCH OFFSETS










								 page 40




******** 2) An EXAMPLE LISTING of MYTEXT.TXT 

                    Texture Definition File Example

*************************** TEXTURE1.TXT ******************************
;
; Anything following a ';' or ';' is ignored (comment).
;
; An asterisk '*' at the beginning of a line indicates a Patch.
;
; ASHWALL is a Texture 64 pixels wide, and 128 pixels high.
; It contains only one Patch, W104_1, with no offset.
;
ASHWALL                 64    128
*     W104_1             0     0
;
; BIGDOOR7 is a Texture of size 256x128 (X size, Y size) composed of two
; Patches, W105_1 and W105_1 placed at offset -4,-4  and offset 124, -4.
;
BIGDOOR7                256   128
*     W105_1             -4    -4
*     W105_1            124    -4
;
; FLOWER is a new Texture (didn't exist in DOOM.WAD).
; It is composed of an old Patch.
;
FLOWER                   32   128
*     TP5_1               0     0
;
; BLODGR2 redefines the old BLODGR2 Texture
; to be composed of the new Patch BIRDY
;
BLODGR2                  34   128
*     BIRDY               0     0
;
; A new Texture, HADDOCK, composed of new and old Patches.
;
HADDOCK                  64   128
*     FISH1               0     0
*     BIGFISH            23    44
*     TP5_1               0     0
;
; Example of wall animation.
;
; Start with the first entry of an existing animation (FIREBLU1).
; Insert additional entries as needed for your animation (ZZZ...).
; End with the closing entry of the existing animation (FIREBLU2).
; When FIREBLU1 is used in your PWAD, it will have your animation!
; Notice that the example uses Sprites as Patches. DOOM don't know
; and DOOM don't care!
;
FIREBLU1                128   128     ;First frame is a redefined
*     WALL62_1            0     0     ;DOOM animated Texture. These
*     BOSSA1             83    47     ;are called in the DOOM.EXE.
*     GOR2A0             20   -70
ZZZA                    128   128     ;Frame  2 inserted.
*     WALL62_1            0     0
*     BOSSB1             75    47
*     GOR2A0             20   -50


                                                                 page 41




ZZZB                    128   128     ;Frame  3 inserted.
*     WALL62_1            0     0
*     BOSSC1             71    47
*     GOR2A0             20   -35
ZZZC                    128   128     ;Frame  4 inserted.
*     WALL62_1            0     0
*     BOSSD1             61    47
*     GOR2A0            20    -25
ZZZD                    128   128     ;Frame  5 inserted.
*     WALL62_1            0     0
*     BOSSF1             47    47
*     GOR2A0             20   -20
ZZZE                    128   128     ;Frame  6 inserted.
*     WALL62_1            0     0
*     BOSSE8             54    47
*     GOR2A0             20   -17
ZZZF                    128   128     ;Frame  7 inserted.
*     WALL62_1            0     0
*     BOSSE7             68    47
*     GOR2A0             20   -16
ZZZG                    128   128     ;Frame  8 inserted.
*     WALL62_1            0     0
*     BOSSE6             64    47
*     GOR2A0             20   -17
ZZZH                    128   128     ;Frame  9 inserted.
*     WALL62_1            0     0
*     BOSSF5             60    47
*     GOR2A0             20   -20
ZZZI                    128   128     ;Frame 10 inserted.
*     WALL62_1            0     0
*     BOSSF4             63    47
*     GOR2A0             20   -25
ZZZJ                    128   128     ;Frame 11 inserted.
*     WALL62_1            0     0
*     BOSSD2D8           64    47
*     GOR2A0             20    35
ZZZK                    128   128     ;Frame 12 inserted.
*     WALL62_1            0     0
*     BOSSB1             68    47
*     GOR2A0             20   -50
ZZZL                    128   128     ;Frame 13 inserted.
*     WALL62_1            0     0
*     BOSSC1             70    47
*     GOR2A0             20   -70
FIREBLU2                128   128     ;Fourteenth Frame is an
*     WALL62_1            0     0     ;edited FIREBLU2, which is
*     BOSSB1             73    47     ;the last frame of the
*     GOR2A0             20   -64     ;DOOM animated Texture.
;
; End of example
;
;
; file ends here. bye!








								 page 42




                      ---------------------------
		  *** [PART THREE]   ALL THE REST ***
                      ---------------------------


CHAPTER 9
*************************** NECESSARY STUFF ***************************



                     ------------------------------
A)                   DeuTex/DeuSF License Agreement
                     ------------------------------


          DeuTex/DeuSF is copyright (c) Olivier Montanuy 1994.
          The GIF code was from a source (c) David Koblas.
          DeuTex code was originally derived from DEU5.21 
		 by Brendon Wyber and Raphael Quinet.
          DeuSF is inspired from DMADDS by Bernd Kreimeier


DeuTex/DeuSF is a Freeware set of tools.
DeuTex is Freeware but NOT public domain.
DeuSF can be freely distributed with PWADS as part of their install.
 
Here are the restrictions on the usage of DeuTex:

- You shall not use these tools to extract or insert copyrighted
  material in DOOM IWADs and PWADs. You are especially not allowed
  to use them to build any 'shareware' DOOM version.

- You are not allowed to modify or reverse engineer these tools.
  (sources will be available to you if I feel you can be trusted)

- You cannot distribute these tools commercially without my written
  consent. This includes all kind of non free distribution (shareware,
  charging for uploads, or selling it on any kind of media).


*Compuserve is allowed to distribute DeuTex/DeuSF without restrictions*


- Anything you build with this tool shall be free for everyone,
  unless you get written permission from me. 

- DeuTex must be distributed with all the files in this package,
  including DeuSF, the manual and this license. Only DeuSF can be
  distributed separately, for reasons mentioned above.

- I will accept no liability for any damage resulting from the use
  of this program. Remember it is freeware. There is no evil intent
  anywhere in the source of this program, but I can't guess what the
  compilers might have hacked out of it, or how your system will feel
  about it.
 





							       page 43




                              -----------
B)                            Legal Stuff
                              -----------


***********************************************************************
*  Please DON'T bother ID software, Raphael Quinet, Brendon Wyber,    *
*  or any of the people mentioned in this manual, with questions      *
*  related to DeuTex                                                  *
***********************************************************************


 If you need information, here are the only sources:

  Olivier Montanuy  (DOS and Unix problems)
  Kevin McGrail     (Manual and Explanations)
  Mark Mathews      (OS/2 problems)
  Per Allansson     (Linux problems)

Why is DeuTex Copyrighted? It's so that I can make the following
requirement, which would be impossible with Public Domain status:

     YOU ARE NOT ALLOWED TO MAKE ANY MODIFICATIONS TO
     THIS PROGRAM OR TO THE INCLUDED FILES. ALL THE FILES
     INCLUDED IN THIS PACKAGE SHALL BE RELEASED TOGETHER.

      If you want modifications, ask me, I'll do my best. 
      Later on I'll release the source, when stabilized.

     USE AT YOUR OWN RISK. NO LIABILITY IS ACCEPTED.

      It runs under DOS, so behavior is unpredictable .
 
     YOU ARE NOT ALLOWED TO MAKE ANY KIND OF PERSONAL
     PROFIT BY SELLING, RENTING, LEASING, OR USING THIS
     PROGRAM, WITHOUT MY EXPLICIT WRITTEN CONSENT.

If you are interested in distributing it on a CD or any
other media, contact me first. I should accept, provided:

                 - you keep the price low, for maximum availability.
                 - you send me a free copy.


SPECIAL EXCEPTION:

CompuServe is allowed to charge normal upload fees to distribute this
program, provided I receive (by e-mail) a monthly report of the total
number of said uploads.


* All right folks, it was a shame, but it had to be stated somewhere...









							 page 44




                     -------------------------
C)                   Where to get DeuTex/DeuSF
                     -------------------------



        DeuTex and DeuSF are meant to be available by anonymous
        FTP on Internet sites: the same as of those of DEU:

                infant2.cdrom.com,ftp.luth.se,iglou.com,...
                /pub/doom/deu
                /pub/doom/wad_edit/misc      



        DeuTex and DeuSF are available on Compuserve, by special
        request of Dr. Sleep:

           GAMERS FORUM LIB 8 ACTION GAME AIDS [CIS:GAMERS]
           PC WORLD FORUM LIB 22 The DOOM ROOM [CIS:PWOFORUM]

           
      DeuTex/DeuSF can be made available on any free of charge BBS.


         Though a freeware tool, DeuTex cannot be distributed
         by shareware vendors without my written agreement.

     DeuSF can be freely distributed, because it is meant to help
     install some PWADs, and thus is not subject to any restrictions.


You might also want to try:

NWT by Denis
A good DOS Tool, easy to use. ideal for making small changes.
Texture text format compatible with DeuTex.

DOOMTEX by Steve McCrea
A list of tools to generate Textures. It's not exactly user friendly,
but successfully used for TRINITY.WAD. For hackers only :-) I *do* hope
you'll find DeuTex a bit easier to use, but Steve was a pioneer in
the area of Texture editing!

WACKER by Keith Wilkins
A Graphic Texture editor. I could not test it, but it should be good.
It would be a good idea to use it in combination with DeuTex.














								  page 45


			  ---------------------
D)                        Version Information
			  ---------------------

New in version 3.3

-  Sound formats are not hacked anymore.

-  Bug corrections and simplifications, for easier maintenance.


-  Loading of patch is still automatic. I have to do something...

-  Commands -merge, -app and -join have been improved and securized.


			     --------------
E)                           Known Problems
			     --------------

-  Color quantization is faster, but optimised for the DOOM and HERETIC
   palettes supplied with DeuTex. Else, it's slower and a bit lossy.

-  Identification of entry types does not always work with PWADS made by
   programs other than DeuTex. There is no general solution to this
   problem, only my best effort. Sprites and Flats could be missed if
   certain conventions are not respected. Misidentified entries are
   stored as Lumps.

-  GIF format defaults to GIF87.


-  No MIDI support. MUS format is too complex to understand. No time.

-  DeuSF does NOT test that all REQUIRED Sprite viewpoints are available
   if you change the number of viewpoints. DOOM will lock up if you
   forget one of the Sprite viewpoints.

-  If the -app command is interrupted, the PWAD file becomes bigger due
   to appended waste data, but it is still operational.

-  DeuSF says stupid things if no command is given.

-  Source is not INCLUDED. It's available to you only if you want to
   port DeuTex to a new environement. When DeuTex is finished, the
   source will be released.



*LIMITATIONS of DOOM

-  Sprites in PWADs only work if you don't reuse existing Sprites. Use
   DeuSF or DMADDS if you want to replace Sprites. Actually, DeuTex
   -merge will also work. (and better!)

-  Flats don't work in PWADs. Use DeuSF or DMADDS if you want to
   replace Flats.  Deutex -merge will also work. (and better!)

*LIMITATIONS of HERETIC

- Sprites in PWAD don't work at all.  use -merge. I don't know why...

								 page 46




							   ------
F)                             THANKS
							   ------


First, thanks to you for taking the time to evaluate DeuTex/DeuSF.
I know my program is not trivial to use, and might be tricky to
understand, but I really think it's worth the trouble.


DeuTex/DeuSF would not have existed without the help of these people:


   Steve McCrea                   Author of TRINITY.WAD and DOOMTEX.

   Raphael Quinet                 Examples of GIF and DEU code.
  (quinet@montefiore.ulg.ac.be)

   Denis Moller			  Author of NWT. Securisation and
  (denis@doomsday.sh.de)          compatibility of DeuTex and NWT.

   Elias Papavassilopoulos        Doom technical information.
  (ep104@cus.cam.ac.uk)

   Matt Fell                      Doom specs version 1.666
  (matt.burnet@acebbs.com)

   Keith Wilkins                  Author of Wacker, first Texture
  (spike@nectech.demon.co.uk)     composer. Try it!

   Tom Neff                       Doom technical information.
  (tneff)

   Bern Kreismeier                Author of DMADDS/DMADDF
  (bernd@nero.uni-bonn.de)

   Dewi Morgan                    Unashamed flattery that lead me to
  (D.Morgan@bradford.ac.uk)       create DeuSF from DeuTex code.

   ID software                    For the DEUTEX/DeuSF test bench, also
  (help@idsoftware.com)           known as 'DOOM', 'DOOM2' or 'HERETIC'

   Raven software                 For those cool graphics in HERETIC.
								  (and for messing with color palettes)

Special Thanx to:


   Mark Mathews                   DeuTex OS/2, DJGPP port.
  (mark.mathews@channel1.com)     Improvements and suggestions.

   Per Allansson                  DeuTex Linux version.
  (c91peral@und.ida.liu.se)

   James Bonfield                 DeuTex DEC ALPHA port


   Chuck Rossi                    DeuTex SGIx port



								   page 47





		     --------------
		     THANKS (cont.)
		     --------------



Thanks to all of you who reported bugs and proposed corrections
or generally supported my efforts:


   Leonard Czajka     leonardc@halcyon.halcyon.com
   Herve.Benvel       Herve.Benvel@inria.fr
   Paolo Hutchison    paolo@netcom.com
   M. Kernaghan       mkernagh@julian.uwo.ca
   Thierry Vermat     vermat@evol10.univ-lyon1.fr
   Jeremy Blackman    ranma@eskimo.com
   Jason Mezzacca     72510.3424@compuserve.com
   C. Gasparo         cgasparo@cymbal.aix.calpoly.edu
   Avery Andrews      andaling@durras.anu.edu.au
   (I'm maybe forgetting you!)


   Thanks to Justin Fisher for letting me use DeuTex and DeuSF on a
   new install for Alien-TC (despite all the small mistakesI made).

 Now comes the guy YOU all want to thank:

	 HevKev, also known as Kevin McGrail, novice Manual Editor.
	 74107.1254@compuserve.com


 Before his contribution, I was the only one who knew how to use DeuTex.
 Now some of you might understand enough about DeuTex to use it in your
 great DOOM conversions project.


























								 page 48




			     -----------
G)                           FINAL WORDS
			      (AT LAST)
			     -----------


Thanx for trying DeuTex.


 I did my best to make it the easy to use, bug free, and portable.
 However, it's not entirely trivial to use.
 I can't spend my life on a freeware tool.


 If you can't understand this tool, chances are your contribution
 to DOOM fandom will be quite limited. Remember, I only worked to make
 your life as simple as it could be, so that even non-specialists
 could produce something cool for DOOM.


 But don't forget that it takes some time, some dedication, and
 some genius also, to make something as great as Aliens-TC.




	Olivier Montanuy,

E-Mail:
	montanuy@lannion.cnet.fr      Work time mailbox (avoid)
	montanuy@dmi.ens.fr           Leisure time mailbox
	montanuy@idsoftware.com       Dream time mailbox
Address:
	Manoir de Keringant, St Quay Perros, 22700 Perros Guirec, FRANCE
	This is in Bretagne (Brittany), the westernmost part of France.
Phone:
	+33 96482047 (time: UTC+1)
	modem: USR 14400 Worldport LITE Modem Fax.
	(I'm a real easy frag.)






















				    page 49




APPENDIX I   Switch Textures in DOOM.WAD


SW1BRCOM                128   128
*     WALL62_1          0     0
*     SW1S0             48    72
SW1BRN1                 64    128
*     WALL02_2          0     56
*     WALL02_2          0     0
*     SW3S0             16    75
SW1BRN2                 64    128
*     WALL02_2          0     56
*     WALL02_2          0     0
*     SW4S0             20    79
SW1BRNGN                64    128
*     WALL62_2          0     0
*     SW4S0             20    80
SW1BROWN                128   128
*     WALL62_1          0     0
*     SW3S1             48    72
SW1COMM                 64    72
*     W13_1             0     0
*     SW1S0             15    18
SW1COMP                 64    128
*     COMP03_4          0     64
*     COMP04_5          0     0
*     COMP03_4          32    64
*     SW2S0             16    72
SW1DIRT                 64    128
*     WALL00_7          32    0
*     WALL00_6          16    0
*     SW1S0             16    20
*     WALL00_6          0     -16
*     WALL00_7          48    0
SW1EXIT                 32    72
*     W32_4             0     0
*     SW2S0             0     16
*     W33_8             0     64
SW1GRAY                 64    128
*     W31_1             0     0
*     W31_1             0     64
*     SW2S0             16    70
SW1GRAY1                64    128
*     W31_1             0     64
*     W31_1             0     0
*     SW4S0             19    79
SW1METAL                64    128
*     WALL03_7          0     0
*     WALL03_7          0     64
*     SW4S0             20    68
SW1PIPE                 128   128
*     TP2_2             0     0
*     SW3S0             48    76








                                                                 page 50




SW1SLAD                 64    128
*     WLA128_1          0     0
*     WARNB0            24    73
SW1STARG                128   128
*     SW19_3            64    0
*     SW19_4            0     0
*     SW3S0             48    76
SW1STON1                64    128
*     W28_8             0     64
*     W28_8             0     0
*     SW1S0             16    78
SW1STON2                64    128
*     W28_5             0     0
*     W28_8             0     64
*     WARNB0            24    73
SW1STONE                64    128
*     WALL01_1          0     0
*     WALL01_2          16    0
*     WALL01_3          32    0
*     WALL01_4          48    0
*     WALL01_1          0     72
*     WALL01_2          16    72
*     WALL01_3          32    72
*     WALL01_4          48    72
*     W33_8             0     64
*     W33_8             0     120
*     SW1S0             16    72
SW1STRTN                64    128
*     SW12_4            0     0
*     SW12_5            32    0
*     SW1S0             16    72
SW2BRCOM                128   128
*     WALL62_1          0     0
*     SW1S1             48    72
SW2BRN1                 64    128
*     STEP07            32    72
*     STEP07            0     72
*     WALL02_2          0     56
*     WALL02_2          0     0
*     SW3S1             16    75
SW2BRN2                 64    128
*     WALL02_2          0     56
*     WALL02_2          0     0
*     SW4S1             20    79
SW2BRNGN                64    128
*     WALL62_2          0     0
*     SW4S1             20    80
SW2BROWN                128   128
*     WALL62_1          0     0
*     SW3S0             48    72
SW2COMM                 64    72
*     W13_1             0     0
*     SW1S1             15    18








																 page 51




SW2COMP                 64    128
*     COMP03_4          0     64
*     COMP04_5          0     0
*     COMP03_4          32    64
*     SW2S1             16    72
SW2DIRT                 64    128
*     WALL00_8          48    0
*     WALL00_7          32    0
*     WALL00_6          16    0
*     WALL00_5          0     -1
*     SW1S1             16    20
SW2EXIT                 32    72
*     W32_4             0     0
*     SW2S1             0     16
*     W33_8             0     64
SW2GRAY                 64    128
*     W31_1             0     0
*     W31_1             0     64
*     SW2S1             16    70
SW2GRAY1                64    128
*     W31_1             0     64
*     W31_1             0     0
*     SW4S1             19    79
SW2METAL                64    128
*     WALL03_7          0     0
*     WALL03_7          0     64
*     SW4S1             20    68
SW2PIPE                 128   128
*     TP2_2             0     0
*     SW3S1             48    76
SW2SLAD                 64    128
*     WLA128_1          0     0
*     WARNA0            24    73
SW2STARG                128   128
*     SW19_3            64    0
*     SW19_4            0     0
*     SW3S1             48    76
SW2STON1                64    128
*     W28_8             0     64
*     W28_8             0     0
*     SW1S1             16    78
SW2STON2                64    128
*     W28_8             0     64
*     WARNA0            24    73
*     W28_5             0     0
SW2STONE                64    128
*     WALL01_1          0     0
*     WALL01_2          16    0
*     WALL01_3          32    0
*     WALL01_4          48    0
*     WALL01_1          0     72
*     WALL01_2          16    72
*     WALL01_3          32    72
*     WALL01_4          48    72
*     W33_8             0     64
*     W33_8             0     120
*     SW1S1             16    72




							       page 52




SW2STRTN                64    128
*     SW12_4            0     0
*     SW12_5            32    0
*     SW1S1             16    72
;
SW1BLUE                 64    128
*     COMP03_1          0     0
*     COMP03_2          0     64
*     SW2_7             14    66
SW1CMT                  64    128
*     WALL54_1          -42   0
*     SW3S1             16    72
SW1GARG                 64    128
*     WALL47_2          0     0
*     WALL42_6          12    62
SW1GSTON                64    128
*     WALL48_2          0     0
*     SW2_7             13    67
SW1HOT                  64    128
*     WALL49_1          0     0
*     SW2_7             12    66
SW1LION                 64    128
*     WALL47_2          0     0
*     WALL42_5          11    62
SW1SATYR                64    128
*     WALL47_2          0     0
*     WALL42_1          12    62
SW1SKIN                 64    128
*     HELL6_3           0     0
*     SW2_5             0     59
SW1VINE                 64    128
*     WALL00_1          0     -16
*     W106_1            0     0
*     SW4S0             20    84
SW1WOOD                 64    128
*     WALL40_2          -64   0
*     SW2_7             14    66
SW2BLUE                 64    128
*     COMP03_1          0     0
*     COMP03_2          0     64
*     SW2_8             14    66
SW2CMT                  64    128
*     WALL54_1          -42   0
*     SW3S0             16    72
SW2GARG                 64    128
*     WALL47_2          0     0
*     WALL47_5          12    62
SW2GSTON                64    128
*     WALL48_2          0     0
*     SW2_8             13    67
SW2HOT                  64    128
*     WALL49_1          0     0
*     SW2_8             12    66








								  page 53




SW2LION                 64    128
*     WALL47_2          0     0
*     WALL47_4          11    62
SW2SATYR                64    128
*     WALL47_2          0     0
*     WALL47_3          12    62
SW2SKIN                 64    128
*     HELL6_3           0     0
*     SW2_6             0     59
SW2VINE                 64    128
*     WALL00_1          0     -16
*     W106_1            0     0
*     SW4S1             20    84
SW2WOOD                 64    128
*     WALL40_2          -64   0
*     SW2_8             14    66













































								     page 54




APPENDIX II   Animated Wall Textures in DOOM.WAD


SLADRIP1                64    128
*     WALL57_2          0     0
SLADRIP2                64    128
*     WALL57_3          0     0
SLADRIP3                64    128
*     WALL57_4          0     0
SLADWALL                64    128
*     WLA128_1          0     0
;
BLODGR1                 32    128
*     TP5_1             0     0
BLODGR2                 32    128
*     TP5_2             0     0
BLODGR3                 32    128
*     TP5_3             0     0
BLODGR4                 32    128
*     TP5_4             0     0
;
BLODRIP1                32    128
*     RP2_1             0     0
BLODRIP2                32    128
*     RP2_2             0     0
BLODRIP3                32    128
*     RP2_3             0     0
BLODRIP4                32    128
*     RP2_4             0     0
;
FIREBLU1                128   128
*     W65B_1            0     0
FIREBLU2                128   128
*     W65B_2            0     0
;
FIRELAV2                128   128
*     W73A_2            0     0
FIRELAV3                128   128
*     W73B_1            0     0
FIRELAVA                128   128
*     W73A_1            0     0
;
FIREMAG1                128   128
*     W74A_1            0     0
FIREMAG2                128   128
*     W74A_2            0     0
FIREMAG3                128   128
*     W74B_1            0     0
;
FIREWALA                128   112
*     WALL23_1          0     0
FIREWALB                128   112
*     WALL23_2          0     0
FIREWALL                128   112
*     WALL22_1          0     0






								  page 55




GSTFONT1                64    128
*     WALL58_1          0     0
GSTFONT2                64    128
*     WALL58_2          0     0
GSTFONT3                64    128
*     WALL58_3          0     0
;
ROCKRED1                128   128
*     WALL64_2          0     0
ROCKRED2                128   128
*     W64B_1            0     0
ROCKRED3                128   128
*     W64B_2            0     0















































								  page 56




APPENDIX III     Listing of Sound Names for DOOM I and II

*Ripped off from DMGRAPH by Bill Neisius*
Then corrected and expanded to include DOOM II Sounds for this manual.
DeuTex uses DOOM's Sound names rather than the artificial Sound numbers
used in DMGRAPH. A Conversion table for this follows.

NOTE: An asterisk '*' means the Sound is used for multiple functions.

               ---------------------------------------
A)             SOUNDS FOUND IN BOTH DOOM I and DOOM II
               ---------------------------------------

     Weapons                                       

DSPISTOL*    Pistol firing
DSSGCOCK*    Shotgun cocking
DSSHOTGN     Shotgun firing (followed by cock)
DSSAWUP      Chainsaw start
DSSAWIDL     Chainsaw idle
DSSAWFUL     Chainsaw with trigger pulled
DSSAWHIT     Chainsaw hitting monster
DSRLAUNC     Rocket Launcher firing
DSBAREXP*    Rocket exploding
DSFIRSHT     Fireballs shot or passing
DSFIRXPL*    Fireball hitting object
DSPUNCH      Player punching
DSPLASMA     Plasma Gun firing
DSFIRXPL*    Plasma Round hitting object
DSBFG        BFG9000 firing
DSRXPLOD     BFG9000 round exploding

     Objects

DSPSTART    Floor/Lift starting
DSPSTOP     Floor/Lift stops (Clunk)
DSSTNMOV    Stairs/ceilings moving
DSDOROPN    Mechanical Door opening
DSDORCLS    Mechanical Door closing
DSBDOPN     Fast Door Open
DSBDCLS     Fast Door Close
DSSWTCHN*   Switch 'thunk' Sound
DSSWTCHX    Switch 'pop' Sound
DSTELEPT    Player/Monster teleport
DSSLOP      GUTS/SLOP (What the name says)
DSITMBK     Item Return in MultiPlayer
DSBAREXP*   Barrel explosion

     Player

DSSKLDTH    Player Push on wall
DSNOWAY     Player blocked by wall
DSOOF       Player hitting ground
DSWPNUP     Weapon pickup
DSITEMUP    Item pickup
DSGETPOW    Power up Sound (Soul Sphere, etc.)
DSPLPAIN    Player injured
DSPLDETH    Player dying scream
DSPDIEHI    Player higher dying scream


								  page 57




     Former Humans

DSPOSACT    Former Human nearby breathing
DSPOSIT1    Former Human sees Player
DSPOSIT2    Former Human sees Player
DSPOSIT3    Former Human sees Player
DSPOPAIN*   Former Human injured
DSPODTH1    Former Human Death Moan
DSPODTH2    Former Human Death Moan
DSPODTH3    Former Human Death Yell

     Imps

DSBGACT     Imps nearby oinking
DSBGSIT1    Imp sees Player
DSBGSIT2    Imp sees Player
DSCLAW*     Imp clawing Player
DSPOPAIN*   Imp injured
DSBGDTH1    Imp dying
DSBGDTH2    Imp dying

     Demons/Spectres

DSSGTSIT    Demon/Spectre sees Player
DSDMACT*    Demon/Spectre nearby
DSSGTATK    Demon/Spectre chomping Player
DSDMPAIN*   Demon/Spectre injured
DSSGTDTH    Demon/Spectre dying

     Cacodemons

DSCACSIT    Cacodemon sees player
DSDMACT*    Cacodemon nearby
DSDMPAIN*   Cacodemon injured
DSCACDTH    Cacodemon dying

     Barons of Hell

DSBRSSIT    Baron sees Player
DSDMACT*    Baron nearby
DSCLAW*     Baron clawing Player
DSDMPAIN*   Baron injured
DSBRSDTH    Baron dying

     Lost Souls

DSSKLATK    Lost Soul attacking
DSDMACT*    Lost Soul nearby
DSDMPAIN*   Lost Soul injured
DSFIRXPL*   Lost Soul dying

     Spider Demon

DSSPISIT    Spider Demon sees Player
DSMETAL     Spider Demon walking
DSSPIDTH    Spider Demon dying





								  page 58




     Cyber Demon

DSCYBSIT    Cyber Demon sees Player
DSHOOF      Cyber Demon walking
DSCYBDTH    Cyber Demon dying

     Miscellaneous

DSPISTOL*    Menu selections
DSPISTOL*    Kills, Items, Secrets & Time at end of Level screen
DSSWTCHN*    Esc to main menu
DSBAREXP*    Level finished explosion at end of Level screen
DSSGCOCK*    Proceed to next Level at end of Level screen
DSTINK      "TINK" To Chat in Modem Play


                    ----------------------------
B)                  SOUNDS FOUND ONLY in DOOM II
                    ----------------------------


     Weapons

DSDBOPN     Open Super Shotgun
DSDBCLS     Close Super Shotgun
DSDBLOAD    Reload Super Shotgun
DSDSHTGN    Fire Super Shotgun

     Revenant

DSSKESIT    Revenant sees Player    
DSSKEACT    Revenant nearby
DSSKEATK    Revenant fires missile
DSSKESWG    Revenant swings at player
DSSKEPCH    Revenant punches player
DSSKEDTH    Revenant dying

     Mancubis

DSMANSIT    Mancubis sees Player
DSMANATK    Mancubis attacks
DSMNPAIN    Mancubis injured
DSMANDTH    Mancubis dying

     Pain Elemental

DSPESIT     Pain Elemental sees Player
DSPEPAIN    Pain Elemental injured
DSPEDTH     Pain Elemental dying

     Baby Spider

DSBSPSIT    Baby Spider sees Player
DSBSPWLK    Baby Spider walking
DSBSPACT    Baby Spider nearby
DSBSPDTH    Baby Spider dying





								 page 59




     Hell Knight

DSKNTSIT    Hell Knight sees Player
DSDMACT*    Hell Knight nearby
DSCLAW*     Hell Knight clawing Player
DSDMPAIN*   Hell Knight injured
DSKNTDTH    Hell Knight dying

     Arch-Vile

DSVILSIT    Arch Vile sees Player
DSVILACT    Arch Vile nearby
DSVILATK    Arch Vile attacks
DSFLAMST    Arch-Vile shoots Flame?
DSFLAME     Arch Vile's Flame arrives
DSVIPAIN    Arch Vile injured
DSVILDTH    Arch Vile dying

     Final Boss

DSBOSSIT    Final Boss sees Player  'to win the game...' reversed
DSBOSPIT    Final Boss spits Cube
DSBOSCUB    Final Boss Cube lands and expands
DSBOSPN     Final Boss injured
DSBOSDTH    Final Boss dying

     Wolfenstein

DSSSSIT     Wolfenstein SS sees player. 'Schultstaffel'-'SS'
DSSSDTH     Wolfenstein SS dying. 'mein lieben' -'My Life!'
DSKEENPN    Commander Keen injured
DSKEENDT    Commander Keen dying

     Unknown

DSRADIO     Phone Sound? Modem play?

























								  page 60




+                ----------------------------------
+ C)             CONVERTING DMAUD Sounds for DEUTEX
+                ----------------------------------
+
+
+
+  For all you DMAUD users out there, here's a chart you can use to
+  convert those DMAUD Sound Numbers to DOOM or DEUTEX Sound Names.
+
+
+
+ DMAUD NO.    DEUTEX/DOOM Name
+
+
+     1           DSPISTOL
+     2           DSSHOTGN
+     3           DSSGCOCK
+     4           DSSAWUP
+     5           DSSAWIDL
+     6           DSSAWFUL
+     7           DSSAWHIT
+     8           DSRLAUNC
+     9           DSRXPLOD
+    10           DSFIRSHT
+    11           DSFIRXPL
+    12           DSPSTART
+    13           DSPSTOP
+    14           DSDOROPN
+    15           DSDORCLS
+    16           DSSTNMOV
+    17           DSSWTCHN
+    18           DSSWTCHX
+    19           DSPLPAIN
+    20           DSDMPAIN
+    21           DSPOPAIN
+    22           DSSLOP
+    23           DSITEMUP
+    24           DSWPNUP
+    25           DSOOF
+    26           DSTELEPT
+    27           DSPOSIT1
+    28           DSPOSIT2
+    29           DSPOSIT3
+    30           DSBGSIT1
+    31           DSBGSIT2
+    32           DSSGTSIT
+    33           DSBRSSIT
+    34           DSSGTATK
+    35           DSCLAW
+    36           DSPLDETH
+    37           DSPODTH1
+    38           DSPODTH2
+    39           DSPODTH3








                                                                 page 61




+    40           DSBGDTH1
+    41           DSBGDTH2
+    42           DSSGTDTH
+    43           DSBRSDTH
+    44           DSPOSACT
+    45           DSBGACT
+    46           DSDMACT
+    47           DSNOWAY
+    48           DSBAREXP
+    49           DSPUNCH
+    50           DSPLASMA
+    51           DSBFG
+    52           DSCACSIT
+    53           DSCYBSIT
+    54           DSSPISIT
+    55           DSSKLATK
+    56           DSCACDTH
+    57           DSSKLDTH
+    58           DSCYBDTH
+    59           DSSPIDTH
+    60           DSHOOF
+    61           DSMETAL







































                                                                   page 62




APPENDIX IV   DeuTex and DeuSF COMMAND SUMMARIES

			   ---------------
A)                         DeuTex COMMANDS
			   ---------------

Command Line Format: DEUTEX <-optional cmds.> <-other cmds.>

******** 1)  STAND ALONE COMMANDS:

-dmtextures           Lists the DOOM Textures in TEXTURE?.TXT.
-check  <myown.wad>   Will look for Textures containing void columns.
-help                 Lists the parameters.
-syntax               Prints short listing of the format of WADINFO.TXT.
-unused <thatlame.wad>   Checks for unused bytes in a PWAD.

******** 2) OPTIONAL COMMANDS:

-doom <doom directory>    Defines the DOOM or DOOM2 directory.
-dir <working directory>  Defines the working directory.
-deu*                     Add 64K at the end of your PWAD for DEU.
-rgb  <R> <G> <B>         Defines the color used for 'transparent'.

-bmp  \_________________/ Format used when EXTRACTING pictures. DeuTex
-gif  /                 \ recognizes both when STORING pictures.
-ppm /
-wave  \_______________/ Format used when EXTRACTING Sounds. DeuTex
-au    /               \ recognizes both when INSERTING Sounds).
-voc  /
-fullsnd*                 For extracting oversize Sound entries.

-level  \               / These tell DeuTex to select Sprites, Patches,
-lump    \             /  Sounds, etc. when composing, decomposing, or
-texture  \___________/   merging PWADS. Commands can be combined.
-sound    /           \   By default, all entries are selected.
-graphic /             \  Those switches can be combined.
-sprite /
-patch /
-flat /
-o      tells deutex it can overwrite the data file if they exist

******** 3) OTHER COMMANDS:

-iwad                     Used with -make, makes IWAD instead of a PWAD.
-wadir <thatcool.wad>     Directory list, with entry identification.
-get   <entry> <thatcool.wad> Get a single entry from a WAD
-extract <thatcool.wad>  Extracts resources from a PWAD and puts them
			 into a subdirectory having the resource name.
-usedtex <thatcool.wad>  List the textures used in a WAD.

-make   <wadinfo.txt> <myown.wad>   Reads WADINFO.TXT and uses it to
	     compose MYOWN.WAD from the files in the subdirectories.

-merge  <myown.wad>      Will merge MYOWN.WAD with DOOM.WAD.
-restore                 Will restore DOOM.WAD and the merged MYOWN.WAD.
-join   <myown.wad> <this.wad> Will merge THIS.WAD with MYOWN.WAD
-app    <myown.wad>            Will append DOOM sprites to MYOWN.WAD
-res    <myown.wad>            Will restore MYOWN.WAD
			 All these commands are like those of DeuSF


								 page 63




			   --------------
B)                         DeuSF COMMANDS
			   --------------


Command Line Format: DeuSF <optional cmds.> <mandatory cmds.>



******** 1) STAND ALONE COMMANDS:


-help                  Lists these parameters.

-format                Displays format conventions a PWAD must follow.

-wadir <thatcool.wad>  Lists the entries in the PWAD directory.


******** 2) OPTIONAL COMMANDS:


-doom <doom directory>  Defines the DOOM or DOOM2 directory.

-sprite   Used with -add or -app, to add only Sprites or only Flats. If
-flat     neither of these commands is present, DeuSF will add both.


******** 3) MANDATORY COMMANDS:


-add  <myown.wad> <allsf.wad>  Creates ALLSF.WAD, with all Sprites and
			       Flats of DOOM.WAD and MYOWN.WAD.

-app  <myown.wad>              Appends unchanged DOOM Sprites and Flats
			       to MYOWN.WAD.

-join <this.wad> <that.wad>    Appends the Sprites and Flats in THAT.WAD
			       to THIS.WAD.

-res <myown.wad>               Restores PWAD modified with -app command.

-merge  <myown.wad>            Like DeuTex

-restore                       Like DeuTex



























								page 71
